高分子乳化剂在高效氟氯氰菊酯水乳剂中的应用  

Application of Polymeric Emulsifier in beta-Cyfluthrin EW

作　　者：陈福良[1] 张磊 贾伟娜[1] 黄桂珍 尹明明[1] 

机构地区：[1]中国农业科学院植物保护研究所,农业部作物有害生物综合治理重点实验室,北京100193 [2]大千高新科技研究中心有限公司,广东汕头515041

出　　处：《农药》2015年第3期188-190,共3页Agrochemicals

基　　金：国家“十二五”科技支撑计划(2011BAE06B06-12)

摘　　要：[目的]探讨高分子乳化剂在水乳剂中的应用。[方法]选用高分子乳化剂,采用反相法制备环境友好型新型高效氟氯氰菊酯水乳剂,并检测其理化性能指标。[结果]5%高效氟氯氰菊酯水乳剂的优化配方为溶剂环己酮8%,高分子乳化剂N-200与G-200组合,配比为2颐2,自来水补足。其优化配方在室温、冷贮、热贮下稳定,各项技术指标均符合水乳剂的质量技术指标要求。[结论]经激光粒度仪测定油珠颗粒粒径,结果表明水乳剂物理稳定性与颗粒粒径分布呈密切相关。[Aims] The aim was to explore the application of polymeric emulsifier in oil-in-water emulsion. [Methods] An environmental friendly and novel formulation of beta-cyfluthrin EW was prepared with polymeric emulsifier by the phase transfer method, in addition, the physical and chemical performance indexes of the formulation were tested.[Results] The optimum formula of be ta-cyfluthrin 5% EW was cyclohexanone 8%, polymeric emulsifier 4%, in which the ratio of N-200 to G-200 was 2：2, and tap water up to 100%. The formula was stable in room temperature, low temperature and thermal storage, and the physical and chemical performance indexes met the technical standard for oil-in-water emulsion. [Conclusions] The particle size of oil droplet was measured by laser particle analyzer, and the results showed that the physical stability of emulsion and particle size distribution were closely related.

关 键 词：高分子乳化剂 高效氟氯氰菊酯 水乳剂 粒径 

分 类 号：TQ453[化学工程—农药化工]