检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘春玲[1] 王道乾[1] 崔文冲[2] 白锐[1]
机构地区:[1]辽宁工业大学电气工程学院,辽宁锦州121001 [2]辽宁工业大学网络管理中心,辽宁锦州121001
出 处:《辽宁工程技术大学学报(自然科学版)》2015年第1期97-101,共5页Journal of Liaoning Technical University (Natural Science)
基 金:辽宁省自然科学基金项目(2014020110);辽宁省优秀人才项目(LR201020);辽宁省教育厅项目(L2011104;L2012229)
摘 要:为实现路灯按需照明和实时监控管理的使用需求,设计以CC2530为控制器,采用ZigBee和GPRS通信的路灯无线监控系统.各路灯节点可工作于环境光照模式、设定时间模式或上位机指令模式.LED调光电路采用PWM调光方式,通过CC2530芯片产生低频PWM调光信号,采用调光芯片HV9910对路灯节点进行调光控制.实际装置的调试与测试结果表明,所设计的装置能实时监测路灯故障信息,路灯亮度可调节,可实现单灯开关控制,能够实现对城市路灯工作状态的集中监控.Street lamps monitoring system is designed that the chip CC2530 is used as controller by using ZigBee and GPRS Communications technology. Each street lamp node can work in one of three modes, environment illumination mode, designated time mode or the PC instruction mode. PWM method is adopted in LED dimming circuit, that the low frequency PWM dimming signal is created through CC2530 chip and the light of street lamp node is adjusted by use of HV9910 chip. The debugging and testing results show that the actual device can monitor the streetlights fault and adjust street lamp brightness, and realize single lamp switch controlling and centralized monitoring for the city street lamps.
关 键 词:ZigBee通信 路灯监控 自动调光 故障检测 光照
分 类 号:TP277[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.197