检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:牛公杰[1] 钱建平[2] 钱立新[1] 武智慧[2] 曹成壮 李定鹏[2]
机构地区:[1]中国工程物理研究院总体工程研究所,四川绵阳621000 [2]南京理工大学机械工程学院,江苏南京210094 [3]沈阳东基工业集团有限公司研发部,辽宁沈阳110000
出 处:《兵工学报》2015年第2期234-241,共8页Acta Armamentarii
基 金:国家自然科学基金青年基金项目(11402248)
摘 要:为了解决复合底排药剂在发射过程中出现的药柱破碎、燃烧失稳等问题,提出了在底排药柱内腔直接加装一种具有短暂性结构保护和辅助燃烧作用的镁合金可燃内衬的防护、助燃措施。利用ABAQUS软件建立了底排药柱在极端工况条件下有、无可燃内衬时的发射过程有限元仿真分析模型,并进行了动态射击对比验证试验。仿真分析表明:可燃内衬能够有效防止底排药柱过度变形。动态射击对比验证试验结果表明:加装可燃内衬后,弹丸平均初速提高4.97 m/s;同时,底排药柱点火燃烧的一致性和稳定性均有所提高。To solve the problems of that composite base bleed propellant grain (CBBPG) is crushed and unstably combusts during launching, a protection strategy is proposed by directly installing a magnesium combustible liner (MCL) with temporary strength protection and auxiliary combustion in the inner hole of CBBPG. The FEM analysis model of CBBPG' s launching process in extreme working conditions is established by using ABAQUS, and the dynamic shooting contrast verification test is done. The simulation resuits show that MCL can effectively prevent CBBPG from excessively deforming during launching. At the same time, the test results show that the average velocity of the projectiles with MCL is increased by 4.97 m/s, and the combustion consistency and combustion stability of CBBPG are both improved.
关 键 词:兵器科学与技术 底排增程技术 底排药柱 动态形变 结构完整性 燃烧稳定性 镁合金可燃内衬
分 类 号:TJ413.5[兵器科学与技术—火炮、自动武器与弹药工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38