T2120深孔钻镗床主轴动态特性仿真与试验  

Simulation and experimental research on the dynamic characteristics of T2120 deep hole drilling and boring machine spindle

作　　者：贾永龙[1,2] 苗鸿宾[1,2] 沈兴全[1,2] 

机构地区：[1]中北大学机械与动力工程学院,太原市030051 [2]山西省深孔加工工程技术研究中心,太原市030051

出　　处：《中国农机化学报》2015年第2期56-58,28,共4页Journal of Chinese Agricultural Mechanization

基　　金：山西省国际合作项目(2012081030)--BTA深孔加工的动态稳定性研究

摘　　要：运用有限元分析方法对T2120深孔钻镗床主轴进行模态分析,分析得到该机床主轴的前六阶固有频率和振型,计算出临界转速,验证了该主轴工作转速的合理性。并通过与该主轴激振试验中固有频率的对比,证明有限元分析法的合理性。模态分析和激振试验都得出该主轴设计的合理性,也得出ANSYS软件对T2120深孔钻镗床主轴进行有限元分析的可行性,为该主轴进一步动态分析提供依据。The modal analysis was carried out by using the finite element analysis method. The first six order natural frequencies and vibration mode of the spindle were obtained, and the critical speed was calculated, which verified the rationality of the spindle operating speed. Comparing it with the natural frequency in the spindle vibration test, the rationality of the finite element analysis method was verified. The modal analysis and the vibration test both proved the rationality of the spindle design, and the feasibility of using ANSYS software to do the finite element analysis, which provides a basis for the further dynamic analysis of the spindle.

关 键 词：机床主轴 模态分析 仿真分析 激振试验 

分 类 号：TG523[金属学及工艺—金属切削加工及机床]