改性涤纶粘胶混纺织物的生产  

Production of Modified Polyester Viscose Blended Fabric

作　　者：杨小艳 王训全 陈红娟 

机构地区：[1]西北二棉纺织有限公司,陕西咸阳712000

出　　处：《棉纺织技术》2015年第3期66-69,共4页Cotton Textile Technology

摘　　要：探讨改性涤纶粘胶混纺织物的生产工艺。介绍了改性涤纶纤维质量指标和织物规格;采取条混工艺,将6根改性涤纶纤维预并条与1根粘胶纤维生条混并;清棉工序适当降低打手速度;梳棉工序适当采用较大的隔距,优选针布型号;在改造的A1291型细纱机上纺制细纱,采用851双层涂料胶辊,保证成纱质量;浆纱工序优选浆料配方和浆纱工艺;织造工序采用"小张力、小开口量"工艺原则,最终保证了产品的顺利生产,织机效率达92%。认为:各工序优选工艺参数,重点避免错号纱、错线纱,最终可以保证产品的顺利生产。Production technology of modified polyester and viscose blended fabric was discussed. Modified polyester quality indexes and fabric specification were introduced. Sliver blending process was adopted. Six modified polyester fiber pre-drawing silver and one viscose sliver were blended and drew. Beater speed was suitably decreased in picking process. Larger gauge was properly used in carding process. Card clothing type was optimized. Modified A1291 spinning frame was adopted for spinning. 851 double layers rubber roller was selected to ensure yarn quahty. Sizing instruction and sizing technology were optimized in sizing process. Technology principle of smaller tension and opening size was chosen in weaving process. Smooth production was guaranteed in the end. Loom efficiency was reached 92%. It is considered that successful production can be ensured by optimizing processing parameters,especially avoiding choosing wrong yarn fineness and wrong yarn type.

关 键 词：改性涤纶纤维 粘胶纤维 梳棉机 并条机 浆料配方 喷气织机 温湿度 

分 类 号：TS105[轻工技术与工程—纺织工程]