检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]河南省瓦斯地质与瓦斯治理重点实验室-省部共建国家重点实验室培育基地,河南焦作454300 [2]河南理工大学安全科学与工程学院,河南焦作454300
出 处:《煤矿安全》2015年第3期1-4,共4页Safety in Coal Mines
摘 要:为了探明沿空巷道周边煤体的应力分布情况及煤层瓦斯含量变化,运用岩体力学与弹性力学的相关理论,基于古汉山矿15091工作面回风巷的现场试验,对该矿的钻屑量与矿山应力以及瓦斯压力之间的关系进行研究,并根据相关公式计算与对钻屑量的分析得出了卸压区的安全宽度及矿山应力的分布规律:卸压区域的安全宽度为12 m,12-25 m为应力集中区,25 m以后为原始应力区。最后结合沿空掘巷周边煤层内应力值与瓦斯含量变化得出了应力集中区内煤体已发生破坏,并得出巷道预排瓦斯宽度应为15 m以上。In order to investigate the stress distribution and the gas content change in the surrounding coal of roadway along gob,we investigate the relation between drilling cuttings weight,gas pressure and ground pressure by using the theories of rock mechanics and elasticity and based on the field experiment in the return airway of 15091 face of Guhanshan Mine. Meanwhile,with the relevant formula and the analysis of drilling cuttings weight,we obtained mine safety width of stress relief zone and distribution of stress; the width of stress relief zone is about 12 m,the location of stress concentration region is from 12 m to 25 m,the location of original stress zone is beyond 25 m. Finally,combined the stress values and the changes of gas content in the coal,the coal in the stress concentration region is damaged,and the pre- exhaust gas roadway width should be 15 m or more.
关 键 词:沿空掘巷 矿山应力 钻屑量 煤与瓦斯突出 瓦斯压力
分 类 号:TD712[矿业工程—矿井通风与安全] TD322
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.173