钻孔与排屑方案自动优化技术  

Automatic Optimization Technique of Hole Drilling and Chip Removal Scheme

作　　者：胡东红[1] 严飞[1] 张玲[1] 周国和 王平江[3] 

机构地区：[1]湖北大学计算机与信息工程学院,湖北武汉430062 [2]湖北三环汽车方向机有限公司设备管理部,湖北咸宁437000 [3]华中科技大学国家数控中心,湖北武汉430074

出　　处：《机床与液压》2015年第5期36-39,共4页Machine Tool & Hydraulics

基　　金：国家科技重大专项课题(2012ZX04001-022);湖北省科技计划资助项目(2012BAA05006);湖北省科技计划资助项目(2014BAA080);武汉市科技计划资助项目(20140101010014)

摘　　要：根据工件所需钻孔的总排数、每一排的总孔数、钻孔深度、减压孔方案、第1次钻孔限定进刀量、第2次钻孔限定进刀量等技术参数要求,编制了相应的钻孔技术方案。经过优化处理后,用户只需设定若干钻孔参数,即可自动生成合理优化的钻孔与排屑方案,其中排屑方案则由多次进钻和退钻实现。The corresponding hole drilling technical scheme was programmed according to the total rows,the total holes in one row,the depth of the hole drilling,pressure-relief hole,the limited 1st drilling depth,the limited 2nd drilling depth,and etc. After optimization process,and by setting only a few drilling parameters,the reasonable and optimal method of hole drilling and chip removal was generated automatically. The chip removal is realized by several times of drilling forward and backward.

关 键 词：钻床 数控 排屑 

分 类 号：TP391[自动化与计算机技术—计算机应用技术]