A Protocol to Develop Phenolic Emulsifiers Used in Micro-surface by Control Technology  

作　　者：刘加平 CHEN Xiang HONG Jinxiang LIU Zhifei 

机构地区：[1]State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science [2]Jiangsu Bote New Material Co., Ltd

出　　处：《Journal of Wuhan University of Technology(Materials Science)》2015年第1期175-180,共6页武汉理工大学学报（材料科学英文版）

基　　金：Funded by the National Key Basic Research and Development Plan(No.2012CB724601);the Jiangsu Provincial Natural Science Foundation(No.BK 2008503)

摘　　要：The phenolic emulsifiers used in emulsified asphalt of micro-surfacing, which was the most important tools in the road maintenance, were investigated by control technology. Many factors influencing this reaction were studied and three kinds of phenolic emulsifiers were prepared without catalyst in ethanol. The performance was researched that 2-（{2-[2-（2-Amino-ethylamino）-ethylamino]-ethyl-amino}-methyl）-4- nonyl-phenol （abbreviated as TETA） could be used in micro-surface. With addition of 0.5 % demulsifier, the mixing time was extended to 120 seconds obviously, and the cohesion torque （60 min） was 2.8 N＊m, which satisfied the opening traffic time shorter than 1 h. The wet track abrasion （6 d） was lower than 807 g/m2, with interracial modifier added, but the load wheel was increased with interfacial modifier increasing. When the TETA： demulsifier： interracial modifier =3：1：3, excellent performance was obtained and the experimental results met the International Slurry Surfacing Association （ISSA） standard. The synthesis process of this emulsifier is simple and the performance used in micro-surface was excellent, so this kind of emulsifier could have a better application future.The phenolic emulsifiers used in emulsified asphalt of micro-surfacing, which was the most important tools in the road maintenance, were investigated by control technology. Many factors influencing this reaction were studied and three kinds of phenolic emulsifiers were prepared without catalyst in ethanol. The performance was researched that 2-（{2-[2-（2-Amino-ethylamino）-ethylamino]-ethyl-amino}-methyl）-4- nonyl-phenol （abbreviated as TETA） could be used in micro-surface. With addition of 0.5 % demulsifier, the mixing time was extended to 120 seconds obviously, and the cohesion torque （60 min） was 2.8 N＊m, which satisfied the opening traffic time shorter than 1 h. The wet track abrasion （6 d） was lower than 807 g/m2, with interracial modifier added, but the load wheel was increased with interfacial modifier increasing. When the TETA： demulsifier： interracial modifier =3：1：3, excellent performance was obtained and the experimental results met the International Slurry Surfacing Association （ISSA） standard. The synthesis process of this emulsifier is simple and the performance used in micro-surface was excellent, so this kind of emulsifier could have a better application future.

关 键 词：phenolic emulsifiers synthesis application micro-surfaces control technology 

分 类 号：U414[交通运输工程—道路与铁道工程]