Preparation, characterization and hydrodesulfurization performances of Co-Ni_2P/SBA-15 catalysts  

作　　者：Zhou-jun Wang Pingyi Wu Ling Lan Kunhong Liu Yaqiong Hu Shengfu Ji 

机构地区：[1]State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology [2]Petrochemical Research Institute,Petro China

出　　处：《Journal of Energy Chemistry》2015年第2期185-192,共8页能源化学（英文版）

基　　金：supported by the National Basic Research Program of China(2006CB202503);Petro China Innovation Foundation(2010D-5006-0401)

摘　　要：A series of Co-Ni_2P/SBA-15 catalysts with various Co contents, Ni_2P contents and P/Ni molar ratios were prepared by impregnating nickel nitrate, diammonium hydrogen phosphate, and then cobalt nitrate into SBA-15 support followed by temperature-programmed reduction in a H_2 flow. The catalyst structure was characterized by X-ray diffraction （XRD）, high resolution-transmission electron microscopy （HR-TEM） and N_2 adsorption-desorption techniques and their catalytic performance of the hydrodesulfurization （HDS） of dibenzothiophene （DBT） was evaluated. The effects of Co contents, Ni_2P contents and P/Ni molar ratios on the catalyst structure and HDS of DBT over the Co-Ni_2P/SBA- 15 catalyst were investigated. The results indicated that the mesoporous structure was mainly maintained and the nickel phosphides were well dispersed in all of the characterized catalysts. The 4Co-25Ni_2P/SBA-15 （P/Ni = 0.8） catalyst with the Co and Ni_2P contents of 4 wt% and 25 wt%, respectively, and the P/Ni molar ratio of 0.8 showed the highest catalytic performance for HDS of DBT. Under the reaction conditions of 380 ℃ and 3.0 MPa, the DBT conversion can reach 99.62%. The HDS of DBT proceeded mainly via the direct desulfurization （DDS） pathway with biphenyl （BP） as the dominant product on all of the catalysts and the BP selectivity was slightly enhanced after the introduction of Co promoters.A series of Co-Ni_2P/SBA-15 catalysts with various Co contents, Ni_2P contents and P/Ni molar ratios were prepared by impregnating nickel nitrate, diammonium hydrogen phosphate, and then cobalt nitrate into SBA-15 support followed by temperature-programmed reduction in a H_2 flow. The catalyst structure was characterized by X-ray diffraction （XRD）, high resolution-transmission electron microscopy （HR-TEM） and N_2 adsorption-desorption techniques and their catalytic performance of the hydrodesulfurization （HDS） of dibenzothiophene （DBT） was evaluated. The effects of Co contents, Ni_2P contents and P/Ni molar ratios on the catalyst structure and HDS of DBT over the Co-Ni_2P/SBA- 15 catalyst were investigated. The results indicated that the mesoporous structure was mainly maintained and the nickel phosphides were well dispersed in all of the characterized catalysts. The 4Co-25Ni_2P/SBA-15 （P/Ni = 0.8） catalyst with the Co and Ni_2P contents of 4 wt% and 25 wt%, respectively, and the P/Ni molar ratio of 0.8 showed the highest catalytic performance for HDS of DBT. Under the reaction conditions of 380 ℃ and 3.0 MPa, the DBT conversion can reach 99.62%. The HDS of DBT proceeded mainly via the direct desulfurization （DDS） pathway with biphenyl （BP） as the dominant product on all of the catalysts and the BP selectivity was slightly enhanced after the introduction of Co promoters.

关 键 词：Co Ni_2P DIBENZOTHIOPHENE HYDRODESULFURIZATION MESOPOROUS PROMOTER 

分 类 号：TE624.9[石油与天然气工程—油气加工工程]