异种铝合金填充式摩擦点焊接头界面行为分析  

Analysis on Interface Behavior of Refill Friction Spot Welded Joint of Dissimilar Aluminum Alloy

作　　者：宿国友 张成聪 郭立杰 

机构地区：[1]上海航天设备制造总厂,上海200245

出　　处：《热加工工艺》2015年第7期232-233,236,共3页Hot Working Technology

基　　金：国防基础科研项目(A0320110014)

摘　　要：以5A90铝锂合金和5A06防锈铝为研究对象,进行了不同压入量下的填充式摩擦点焊试验,并对接头进行了金相观察、扫描电镜测试和能谱分析。结果表明,搭接界面处搅拌套下方区域界面清晰,而搅拌针下方区域材料相互融合并呈交替层状分布;压入量对界面金属材料流动影响较大,随着压入量增加,界面处材料融合程度增加。The lap joints of 5A90 aluminium-lithium alloy and 5A06 antirust aluminuna alloy were welded by refill fi-iction spot welding process with a range of plunge depths. The OM, SEM and EDS tests of the wcldcd joint were carried out. The results indicate that the material of the area under the plunge tool of the joint has an obvious interface, while that under the pin mixed together and exhibited layered shape. The plunge depth is a key factor for material flow, and the mixture degree of the material in the interface increases with the increase of plunge depth.

关 键 词：铝锂合金 防锈铝 填充式摩擦点焊 界面行为 

分 类 号：TG456.9[金属学及工艺—焊接]