摊铺机振捣装置的动力学仿真分析  

Dynamics Simulation Analysis on Paver Vibration Device

作　　者：顾秋军 李晓辉[1] 李耀[1] 张玉双[1] 

机构地区：[1]长安大学道路施工技术与装备教育部重点实验室,陕西西安710064

出　　处：《山东交通学院学报》2015年第1期69-72,共4页Journal of Shandong Jiaotong University

摘　　要：利用Pro/E软件建立某型摊铺机振捣装置的三维虚拟样机模型。利用Adams软件的相关模块对摊铺机振捣装置进行三维动力学仿真试验,分析振捣频率和振捣装置行程对机器工作的影响,建议在实际施工中选择振捣装置的振捣频率不宜超过25 Hz,行程以6 mm为宜。A three-dimensional virtual prototype model of the vibration device of a paver is established with Pro/ E. The related modules of Adams software is used to carry out the 3-D dynamic simulation on paver vibration device, analyze the effect of vibration frequency and the stroke of vibration device on the machine. It is suggested that the frequency of the vibration device is less than 25 Hz and the stroke is fit for 6 mm in actual construction.

关 键 词：摊铺机 振捣装置 仿真 

分 类 号：U415.521[交通运输工程—道路与铁道工程]