MABR-絮凝联合工艺处理合成橡胶废水的探索  

Investigation of the treatment of synthetic rubber wastewater by the combined process,MABR-flocculation

作　　者：胡亮[1,2,3,4] 赵德喜 侯飞飞[1,2,3,4] 王琴[1,2,3,4] 李保安[1,2,3,4] 王世昌[1,3,4] 

机构地区：[1]天津大学化工学院化学工程研究所,天津300072 [2]化学工程联合国家重点实验室,天津300072 [3]天津市膜科学与海水淡化重点实验室,天津300072 [4]天津化学化工协同创新中心,天津300072 [5]中海油(中国)有限公司天津分公司渤西作业公司,天津300452

出　　处：《工业水处理》2015年第4期60-64,共5页Industrial Water Treatment

基　　金：国家自然科学基金项目(51478304);天津市科技支撑计划项目(13ZCZDSF00500)

摘　　要：提出以膜曝气生物反应器(MABR)与絮凝联合工艺处理合成橡胶废水。在MABR工段,膜内曝气压力为0.08 MPa、料液循环流速为0.04 m/s时,COD、NH4+-N、色度的去除率分别达到78.7%、97.8%、24.1%。在一定范围内,增加膜内曝气压力及提高料液流速有利于MABR性能的提高。在絮凝工段,通过添加复合絮凝剂能进一步将COD降至45 mg/L、色度降至47倍。MABR-絮凝联合工艺是一种可高效处理合成橡胶废水的新型工艺技术。The combined process,membrane-aerated biofilm reactor（MABR）-flocculation,for the treatment of syn-thetic rubber wastewater has been proposed. In the MABR section ,when the intra-membrane aeration pressure is 0.08 MPa and the feed flow velocity 0.04 m/s,the removing efficiencies of COD,ammonia nitrogen and chroma are 78.7%,97.8%and 24.1%,respectively. Within a certain range,increasing the intra-membrane aerated pressure and improving the feed flow velocity are advantageous for the enhancement of MABR capacity. In the flocculation sec-tion,the COD and chroma are further reduced to 45 mg/L and 47 times,respectively by adding composite flocculant. The combined process,MABR-flocculation is a kind of new type of technology which can be applied to the efficient treatment of synthetic rubber wastewater.

关 键 词：膜曝气生物反应器 絮凝 合成橡胶废水 

分 类 号：X703.1[环境科学与工程—环境工程]