螺旋输送装置转速和喂入量对输送性能的影响试验研究  

Experimental Study the Conveying Capability of Screw Conveyor Affected by Rotation Speed and Feeding Amount

作　　者：乌兰图雅[1] 王春光[1] 赵圆圆[1] 王金莲[1] 

机构地区：[1]内蒙古农业大学机电工程学院,呼和浩特010018

出　　处：《农机化研究》2015年第7期206-208,212,共4页Journal of Agricultural Mechanization Research

基　　金：国家自然科学基金项目(50865005)

摘　　要：通过试验,研究喂入量和螺旋转速对输送量和功耗的影响。试验结果表明:螺旋转速越高、输送装置的功耗越大,但输送量不随转速无限增大,当转速达到102r/min时输送量达到最大值;喂入量越大,输送量越大,输送装置的功耗也随之增加。因此,在实际应用中能满足生产需求的情况下,转速和喂入量不宜过高。This dissertation applies the experimental study to studying the performance of conveying affected by feeding a-mount and screw speed.The higher screw rotational speed, the greater power consumption.But the throughput increases with infinite speed, and the speed of 102 r/min when reach maximum throughput.The greater feeding amount, the grea-ter throughput,and greater the power consumption of conveyor Therefore should chose the reasonable rotation speed and feeding amount that can meet the production requirements in practical application.

关 键 词：螺旋输送 喂入量 转速 饲料 

分 类 号：S817.16[农业科学—畜牧学]