钢骨—圆钢管高强混凝土长柱的力学性能研究  

Research on mechanical properties of slender columns made of circular steel tubes filled with steel-reinforced high-strength concrete

作　　者：陈兰响 关萍[1] 刘晴晴[2] 

机构地区：[1]大连大学建筑工程学院,辽宁大连116622 [2]沈阳建筑大学土木工程学院,辽宁沈阳110168

出　　处：《广西大学学报（自然科学版）》2015年第2期264-271,共8页Journal of Guangxi University（Natural Science Edition）

基　　金：国家自然科学基金资助项目(50908026);辽宁省教育厅科学研究项目(L2013475)

摘　　要：为了研究钢骨—圆钢管高强混凝土长柱的力学性能,利用ABAQUS有限元分析软件建立组合柱的有限元分析模型,分析长细比、材料强度和钢管壁厚等因素对组合长柱力学性能的影响,并建立长柱的稳定极限承载力公式。研究结果表明:基于ABAQUS软件选取的力学模型符合要求;长细比、偏心率和钢管壁厚对组合长柱的受力性能影响较大,材料强度和型钢截面形状对其影响相对较小;建立的简化承载力公式计算结果与试验结果吻合良好(均值为1.039,偏差为0.046),适用范围广。To study the mechanical properties of slender columns made of circular steel tubes filled with steel-reinforced concrete （STSRHC）, a mechanical model of the composite columns is established by the finite element software ABAQUS for the influence of the sender ratio, material strength and thickness of steel tube on the slender columns, etc. In addition, the formula of the ultimate bearing capacity of the slender columns is also established. The results indicate that the mechanical model established in ABAQUS meets the requirements. The slender ratio, eccentricity and thickness of steel tube have greater influence on the mechanical properties, and the influence of material strength and shape of built-in steel is relatively small; the bearing capacity calculated by the simplified formula is in good agreement with the experimental results （The mean value is 1. 039, and the deviation is 0. 049）, and the formula has a wide range of application.

关 键 词：圆钢骨—圆钢管高强混凝土 有限元 长细比 稳定承载力 

分 类 号：TU398[建筑科学—结构工程]