Prediction and Control of Thermal Scratch Defect on Surface of Strip in Tandem Cold Rolling  

作　　者：Jin-shan CHEN Chang-sheng LI 

机构地区：[1]State Key Laboratory of Rolling and Automation,Northeastern University

出　　处：《Journal of Iron and Steel Research International》2015年第2期106-114,共9页

基　　金：Sponsored by National Natural Science Foundation of China(51174057,51274062);National High Technology Research and Development Program of China(2012AA03A503)

摘　　要：The thermal scratch significantly influences the surface quality of the cold rolled stainless steel strip. In or der to establish a precise mathematical model of oil film thickness in deformation zone, the lubrication in cold rolling process of B443NT stainless steel strip was studied in the laboratory. According to the principle of statistics, a math- ematical model of critical oil film thickness in deformation zone for thermal scratch was built, with fitting and regres- sion analytical method, and then based on temperature comparison method, the criterion for deciding thermal scratch defect was put forward. Storing and calling data through SQI. Server 2005, a software on thermal scratch control was developed in the Microsoft Visual Studio 2008 environment by MFC technique for stainless steel in tandem cold roll- ing, and then it was used into the practical production. Statistical results demonstrated that the hit rate of thermal scratch arrives at 91.47%, the occurrence rate of thermal scratch is decreased by 87.81%, and rolling speed is in- creased by 7.3%. The developed software is of significance to the control of products quality of stainless steel strips, and the analysis and solution to the problem of thermal scratch defects in tandem cold rolling.The thermal scratch significantly influences the surface quality of the cold rolled stainless steel strip. In or der to establish a precise mathematical model of oil film thickness in deformation zone, the lubrication in cold rolling process of B443NT stainless steel strip was studied in the laboratory. According to the principle of statistics, a math- ematical model of critical oil film thickness in deformation zone for thermal scratch was built, with fitting and regres- sion analytical method, and then based on temperature comparison method, the criterion for deciding thermal scratch defect was put forward. Storing and calling data through SQI. Server 2005, a software on thermal scratch control was developed in the Microsoft Visual Studio 2008 environment by MFC technique for stainless steel in tandem cold roll- ing, and then it was used into the practical production. Statistical results demonstrated that the hit rate of thermal scratch arrives at 91.47%, the occurrence rate of thermal scratch is decreased by 87.81%, and rolling speed is in- creased by 7.3%. The developed software is of significance to the control of products quality of stainless steel strips, and the analysis and solution to the problem of thermal scratch defects in tandem cold rolling.

关 键 词：thermal serateh software design tandem cold rolling TEMPERATURE stainless steel 

分 类 号：TG333[金属学及工艺—金属压力加工]