腕戴式低功耗无线心率监测装置的研制  

Low power,wireless,wrist-worn device for HR monitoring based on double channels of pulse sensing

作　　者：周聪聪[1] 涂春龙[1] 高云[1] 王飞翔[1] 何成[1] 龚红伟[2] 连平[2] 叶学松[1,3] 

机构地区：[1]浙江大学生物医学工程学系,浙江杭州310027 [2]解放军第85医院,上海200052 [3]浙江大学唐仲英传感材料及应用研究中心,浙江杭州310027

出　　处：《浙江大学学报（工学版）》2015年第4期798-805,共8页Journal of Zhejiang University：Engineering Science

基　　金："十一五"全军重大专项资助项目(W08Z008);国家"863"高科技支撑计划资助项目(2012BAH06F00);国家科技支撑计划课题(2012BAI14B06)

摘　　要：研制新型的基于双通道脉搏传感的腕戴式无线低功耗心率实时监测装置.根据人体腕部生理解剖的特点,提出桡动脉、尺动脉双通道脉搏波及差分信号同步检测的新方法.研制了集传感器、调理电路、微处理器、通讯、自动增益算法和心率算法等软、硬件部件于一体的小型化装置.电路系统测试表明:在待机和工作模式下的平均工作电流分别约为10和300μA;对10名男性在休憩状态下的心率进行3h的连续动态监测,将测试结果与标准动态心电图记录的数据进行比较,结果表明,心率测量的算术平均误差约为0.3BPM.A new low‐power wrist‐worn miniature device used for real‐time wireless heart rate （HR） monitoring was presented . A novel pulse signal detection method based on double channels of pulse sensing of the radial artery and ulnar artery as well as their differential signal was proposed .A miniature device consisting of sensors ,signal condition system was fabricated .The micro‐controller is responsible for power administration ,and calculation of auto gain control algorithm and heart rate algorithms .The average currents are about 10μA and 300μA in standby and active modes ,respectively .Ten male subjects were selected to test the performance of the device through a three‐hour continuous test in their resting condition with the reference of a Holter monitor .The HR of the device was compared with the HR from the ECG signal recorded by the Holter monitor .The experimental results indicate that the arithmetical average error is about 0 .3 BPM .

关 键 词：心率监测 腕戴式 无线监测 双通道 低功耗 

分 类 号：R318[医药卫生—生物医学工程]