双滑板平动回转压缩机热力及动力学性能研究  

Research on the Thermodynamic and Dynamic Performance for the Double Vane Translational Rotary Compressor

作　　者：仓荣[1] 王琼[1] 张江[1] 屈宗长[1] 马晓红[2] 

机构地区：[1]西安交通大学能源与动力工程学院,陕西西安710049 [2]吉林油田勘察设计院工艺室,吉林松原138000

出　　处：《压缩机技术》2015年第2期1-5,共5页Compressor Technology

基　　金：国家科技重大专项"松辽盆地CO2驱油与埋存技术示范工程"(2011ZX05054)

摘　　要：建立了双滑板平动回转压缩机的热力学和动力学模型,通过Matlab编程模拟了该压缩机在运转过程中温度、压力变化规律,通过压力参数计算出轴径向受力,并比较了有无弹簧对该结构轴承造成的影响。结果表明双滑板结构比单滑片在理论输气量上提高了67.6%,增设弹簧虽然使轴径向受力更加大,而且合力方向趋于集中,容易造成轴承偏磨严重,润滑不佳,但增设弹簧必然加强滑板的密封效果。The thermodynamic and dynamic model for the double vane translational rotary compressor was firstly established. Then the temperature and the pressure during the operation of the compressor were simulated with Matlab. The radial force on the shaft can be calculated combined with the pressure, and the impact of spring on the bearing was compared. The results show that the double slide structure than single vane on the theoretical capacity increases by 67.6%. If adding the spring, it although will make the radial force on the shaft increase and grow more concentrated, which will make the bearing concentrated wear heavier and lubrication worse, it also can strengthen the sealing.

关 键 词：双滑板平动回转压缩机 热力学模型 轴径向受力 

分 类 号：TH45[机械工程—机械制造及自动化]