检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]哈尔滨工程大学航天与建筑工程学院,黑龙江哈尔滨150001 [2]中国地震局工程力学研究所,黑龙江哈尔滨150080
出 处:《地震工程与工程振动》2015年第2期71-77,共7页Earthquake Engineering and Engineering Dynamics
基 金:地震行业科研专项项目(201208019);国家自然科学基金重大研究计划(91315301-10)
摘 要:地震发生时建筑物的倒塌是造成人员伤亡的最直接原因。在地震救援时,救援人员对废墟形式的准确了解能够有效地提高救援效率。倒塌废墟形成规律的研究方法多种多样,利用数值方法模拟建筑物倒塌也是一种值得尝试的方法。利用数值方法进行结构倒塌模拟时可以通过程序开发分析,也可以直接使用显示动力分析软件分析。不管使用何种数值方法,结构构件的材料特性和断裂处理都直接影响着计算结果的准确度。本文基于显式动力分析软件LS-DYNA,使用winfrith材料模型和基于裂缝宽度相关的失效准则,进行了单层砌体振动台试验模型的倒塌模拟分析,并与试验结果进行了对比。结果表明,此方法较为可靠,可进行砌体结构的倒塌模拟。In an earthquake, the collapse of buildings is the most direct cause of casualties. In a seismic rescue, the exact realization of the ruin formation can improve the rescue effectively. Research methods of collapse ruins formations are varied, but the numerical method is also worth being attempted. The collapse simulation of structures with the numerical method can be implemented with application program developments, it can also be directly im- plemented with explicit dynamic software. No matter which kind of numerical method is used, both the material property of structure members and the fracture processing method directly affect the accuracy of the calculation re- sult. In the paper, the collapse simulation of a single-story masonry test model is achieved with dynamic software LS-DYNA,using Winfrith material model and failure criterion based on the crack width. The comparison between test and calculation results shows that the method is reliable and can be used for the collapse simulation of masonry.
关 键 词:倒塌废墟 倒塌模拟 单层砌体 LS-DYNA Winfrith 裂缝宽度
分 类 号:P315.92[天文地球—地震学] TU317[天文地球—固体地球物理学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249