高选择性吸收式可调带阻滤波器的研究  

Research of the High Selectivity Absorptive Tunable Bandstop Filter

作　　者：张程[1] 耿军平[1] 金荣洪[1] 梁仙灵[1] 

机构地区：[1]上海交通大学电子工程系,上海200240

出　　处：《中国电子科学研究院学报》2015年第2期175-179,共5页Journal of China Academy of Electronics and Information Technology

基　　金：国家重大专项(2011ZX03001-007-03);国家自然科学基金(61201058;61471240);上海市教育委员会科研创新项目(12Z112030001);教育部留学回国人员科研启动基金;SMC-晨星优秀青年教师计划

摘　　要：该研究利用耦合相消原理设计了一种吸收式可调带阻滤波器。在传统耦合相消结构的基础上,提出了一种新的结构,通过增加耦合结构的阶数以及增大耦合支路中谐振器的电长度,使得滤波器阻带特性的Q值增大,从而提高了滤波器的选择性。通过调节加载在谐振器上变容二极管的偏置电压,实现滤波器带阻中心频率可调。并对实测结果和仿真结果进行了探讨。Combining with coupling cancellation principle, an absorptive tunable bandstop filter （BSF） is designed in this paper. Based on the traditional structure of the coupling cancellation, the filter with high quality-Factor can be acquired by increasing the order of coupling structure and the electrical length of the resonators in coupling branch. Then, the selectivity of the filter is increased. The center frequen- cies of the BSF is tunable by adjusting the bias voltage value of the variable capacitance diodes in the resonators. The insert loss of the filter is less than 0.44dB. In the stopband range, the return loss is more than 10 dB, while the stopband rejection maintains 15 dB, and the absorptive feature is demonstrated. Over the tuning range 5.17 GHz -5.56 GHz, the minimum -3 dB bandwidth is 120 MHz and the minimum - 3 dB stopband fractional bandwidth is 2. 32%, and high selectivity of the filter is achieved. Good agreement between measured and simulated frequency responses can be obtained.

关 键 词：吸收式带阻滤波器 高选择性 可调带阻滤波器 

分 类 号：TN713[电子电信—电路与系统]