喷水推进轴流泵三元水力设计  

Three-dimensional hydraulic design of axial waterjet pump

作　　者：曹玉良[1] 王永生[1] 靳栓宝[1] 

机构地区：[1]海军工程大学动力工程学院,湖北武汉430033

出　　处：《交通运输工程学报》2015年第2期42-49,共8页Journal of Traffic and Transportation Engineering

基　　金：国家自然科学基金项目(51309229)

摘　　要：基于环量的三元设计方法和计算流体动力学,研究了叶片数、叶片流向环量中心位置与叶片出口边环量对叶轮性能的影响,分析了导叶进口边和出口边环量对喷水推进轴流泵性能的影响,通过合理地控制这些因素,设计了一种效率高、空化性能好的喷水推进轴流泵。在流量为56.2m3·s-1时,泵的扬程为35.9m,功率为21 465kW,效率为92.3%,可见,设计泵的性能优良,效率高。研究结果表明:增加叶片数能够有效减小单叶片转矩,当叶片数从5个增加到7个时,单叶片转矩减小了21%;叶片环量中心靠近出口边,有利于提高叶轮的空化性能,当环量中心从叶片弦长的0.3处移动到0.7处时,叶轮吸力面空化面积减小80%;叶轮出口边环量斜率会影响叶轮效率,当斜率分别为0.8、1.0和1.2时,叶轮效率逐步提高;当出口边环量从0.40增加到0.50时,叶轮的扬程和功率近似线性增加,扬程增加19.9%,功率增加19.5%;随着导叶进口边环量与出口边环量的比值的增大,泵效率先增大后减小,当比值为0.93时,泵的效率最高;导叶出口边环量分布会影响泵的效率、出口不均匀度和出口周向动能,当导叶出口边环量为-0.05时,泵的效率最高,出口不均匀度和出口周向动能最小。By using three-dimensional design method based on circulation and computational fluid dynamics,the effects of blade number,blade circulation center position and blade trailing edge circulation on rotor performances were studied,the influences of leading edge circulation and trailing edge circulation of stator on axial waterjet pump performances were analyzed,and an axial waterj et pump with high efficiency and good cavitation capacity was designed by controlling the factors properly.When the flow is 56. 2 m3 ＆#183;s-1 ,the head,power and efficiency of the pump are 35. 9 m,21 465 kW and 92. 3%,respectively,so the properties and efficiency of the pump are high.Analysis result shows that increasing blade number is effective to decrease single blade torque,when blade number increases from 5 to 7,single blade torque decreases by 21%. Circulation center moving closer to trailing edge is beneficial to better cavitation performance of rotor,when circulation center moves from 3/10 to 7/10 of blade string length,cavitation area on rotor suction side decreases by 80%.The slope of rotor trailing edge circulation affects rotor efficiency,when the slope changes from 0. 8 to 1. 2 ,rotor efficiency increases gradually.Rotor head and rotor power almost increase linearly when trailing edge circulation ranges from 0. 4 to 0. 5 ,rotor head increases by 1 9. 9%,and rotor power increases by 1 9. 5%.Pump efficiency firstly increases and then decreases with the ratio increase of stator leading edge circulation to rotor trailing edge circulation,and the efficiency is highest when the ratio is 0. 93.Stator trailing edge circulation has effects on pump efficiency,outlet non-uniformity and outlet circumfluent energy,when stator trailing edge circulation is -0. 05 ,pump efficiency is highest,and outlet non-uniformity and outlet circumfluent energy are least.4 tabs,16 figs,20 refs.

关 键 词：船舶工程 喷水推进轴流泵 计算流体动力学 三元水力设计方法 环量 叶片数 空化 

分 类 号：U664.34[交通运输工程—船舶及航道工程]