影响聚氨酯泡沫塑料回弹性的因素  

The Factors Affecting Springback of Polyurethane Foam

作　　者：姚丽娜[1] 

机构地区：[1]青岛科技大学橡塑材料与工程教育部重点实验室,山东青岛266042

出　　处：《上海塑料》2014年第4期7-13,共7页Shanghai Plastics

摘　　要：总结了影响高回弹泡沫塑料回弹性的因素,如泡孔的开孔率、形状、孔径及其规整性。在一定范围内,开孔率越高,回弹性越好;球形泡孔的回弹性高于其它形状泡孔的回弹性;在外力作用下,大孔径泡孔的形变是不可逆的,而小泡孔的形变是可逆的,但泡孔孔径不是越小,回弹性越好,而存在一个最佳值。泡沫塑料的回弹性随泡孔密度的增加而上升。为了获得尽可能大的泡孔密度,要求合理的孔径分布。The factors affecting high resilience foam elasticity are summarized, such as cell open- ing rate, cell shape, cell size and its regularity. Within a certain range, the higher the cell open- ing rate, the better the resilience. The resilience of spherical cell is higher than that of the other shapes. Under the stress, the deformation of larger apertures is irreversible, and the deforma- tion of smaller cells is reversible. But the aperture is not as small as possible, and there is an optimal value. The resilience of foam is better with the increasing of cell density. So in order to obtain the greatest possible cell density, it requires reasonable cell size distribution.

关 键 词：开孔率 孔径 孔径分布 乱孔结构 

分 类 号：TQ328.3[化学工程—合成树脂塑料工业]