酸性气田集输管道缓蚀剂预膜技术  

The Technology of Corrosion Inhibitor Batching for Gathering Pipelines in Sour Gas Field

作　　者：张仁勇[1,2] 杜磊[1,2] 冯敏[3] 李林辉[1,2] 上官昌淮[1,2] 陈勇彬[1,2] 

机构地区：[1]中国石油集团工程设计有限责任公司西南分公司,四川成都610041 [2]中国石油天然气集团公司石油管工程重点实验室酸性气田管材腐蚀与防护研究室,四川成都610041 [3]中国石油抚顺石化公司烯烃厂,辽宁抚顺113004

出　　处：《全面腐蚀控制》2015年第4期83-86,共4页Total Corrosion Control

基　　金：国家科技重大专项资助项目(2011ZX-05059-004);中国石油天然气股份有限公司科学研究与技术开发项目(2011E-2505)

摘　　要：酸性天然气集输管道常采用加注缓蚀剂进行防腐,并在缓蚀剂连续加注的同时,还定期进行清管和预膜以保证缓蚀剂防腐工艺效能。本文概述了酸性天然气集输管道预膜技术,包括缓蚀剂的选型、常用预膜工艺和预膜用量计算,分析了湿气管道缓蚀剂预膜技术的特点,并结合工程实践提出了预膜工艺技术要求和效能评估方法。Filling corrosion inhibitor is a kind of universal method in anti-corrosion technology of sour gas gathering and transfering pipelines. Pigging termly and batching technology should be conducted in order to ensure the efficiency. The lectotype of inhibitor, frequently-used of batching technology and calculation of batching of corrosion inhibitor were discussed in this paper .The characteristics of batching technology used in wet sour gas environment were analysed. The technical requirements and performance evaluation of batching technology were presented with the combination of engineering practice.

关 键 词：缓蚀剂 预膜 清管 酸性天然气 集输管道 

分 类 号：TE83[石油与天然气工程—油气储运工程]