连续球压痕法测试压力容器钢力学性能的研究  

Research on the Measurement of Mechanical Properties of Pressure Vessel Steels through Continuous Ball Indentation Test

作　　者：汤杰[1,2] 王威强[1,3,4] 苏成功[1,3,4] 王鹏飞[1,3,4] 

机构地区：[1]山东大学机械工程学院,济南250061 [2]浙江省特种设备检验研究院,杭州310020 [3]山东省特种设备安全工程技术研究中心,济南250061 [4]山东大学特种设备安全保障与评价研究中心,济南250061

出　　处：《振动．测试与诊断》2015年第2期281-288,398-399,共8页Journal of Vibration,Measurement & Diagnosis

基　　金：国家重点基础研究发展计划("九七三"计划)资助项目(2011CB013401)

摘　　要：为探讨材料力学性能无损测试的新方法,分析研究了连续球压痕试验测试材料力学性能的原理,并以压力容器用钢15CrMoR,Q245R,Q345R等3种钢板为研究对象,采用连续球压痕试验与常规拉伸试验相比较的方法,测试了屈服强度、抗拉强度等力学性能,深入开展了连续球压痕试验与常规拉伸试验所测试力学性能的比对分析工作。比对结果表明了连续球压痕试验在测试压力容器用钢力学性能方面的可行性、可靠性与准确性,证明连续球压痕试验法可以应用于工程中部分材料力学性能的无损检测。Non-destructive testing of a material′s mechanical properties has been a prominent topic in recent years.In this paper,a new non-destructive testing method is investigated.Two types of tests used for measuring mechanical properties of materials(continuous ball indentation tests and conventional tensile tests)are discussed and applied to measure the yield strength and tensile strength of three kinds of pressure vessel steels used in China,including 15 CrMoR,Q245R,and Q345 R.Comparative analysis shows that the measurements done by the continuous ball indentation test are feasible and more accurate.This proves that the continuous ball indentation testing method can be applied to the non-destructive testing of mechanical properties of some engineering materials.

关 键 词：力学性能 无损测试 连续球压痕 压力容器钢 

分 类 号：TG115.5[金属学及工艺—物理冶金]