检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:严宏志[1,2] 陈新宇[1,2] 叶辉[1,2] 赵鹏[1,2] 王祎维
机构地区:[1]中南大学高性能复杂制造国家重点实验室,湖南长沙410012 [2]中南大学机电工程学院,湖南长沙410012
出 处:《机械传动》2015年第5期110-114,共5页Journal of Mechanical Transmission
基 金:国家重点基础研究发展计划(973计划)项目(2011CB706800-G)
摘 要:弹簧离合器是通过弹簧两端激发圈在壳体内预压缩产生摩擦力矩实现自激的,弹簧两端激发圈预压缩量的大小直接影响离合器的结合性能及使用寿命。运用有限元方法建立了弹簧离合器动力学模型,求解了不同端部预紧量下高速弹簧离合器输出壳体与输入壳体速度的同步性,以及弹簧的Mises应力和径向位移,由此得到了弹簧离合器自激接合的弹簧预压缩量条件,并与解析求解得到的离合器临界预压缩量进行了对比。此外,有限元分析结果表明,稳态接合后弹簧的应力分布呈M型,弹簧的过渡线圈段应力出现峰值,而中间端应力分布均匀。该分析可为弹簧离合器的优化设计提供依据。The self-excitation of the spring clutch is realized through the pre-compression between the excitation coils at either end of the spring and housing to generate frictional torque to energize the spring.The pre-compression amount of excitation coils at either end of the spring has a great impact on the binding property and lifetime of spring clutch.The spring clutch dynamics model is established by using the finite element analysis method.On ABAQUS platform,the speed synchronization of high speed spring clutch output shell and the input shell,the Mises stress and radial displacement of spring under different pre-compression are solved,and then the pre-compression amount condition of the self-exciting meshing of the spring clutch is obtained,and it is compared with the critical amount of pre-compression of clutch obtained by the analytic solution.Besides,the finite element analysis results show that the steady state stress distribution of spring exhibits M shape,that is,the transition coils have peak stress while the middle coils have uniform stress distribution.The basis for optimal design of spring clutch can be provided.
分 类 号:V275.1[航空宇航科学与技术—飞行器设计]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249