Ka波段带状注相对论扩展互作用速调管放大器的分析与设计  

Analysis and design of a Ka-band sheet beam relativistic extended interaction klystron amplifier

作　　者：刘振帮[1] 赵欲聪 黄华[1] 金晓[1] 雷禄容[1] 

机构地区：[1]f中国工程物理研究院应用电子学研究所、高功率微波技术重点实验室,绵阳621900

出　　处：《物理学报》2015年第10期385-393,共9页Acta Physica Sinica

基　　金：国家自然科学基金(批准号:11475158);高功率微波技术重点实验室基金(批准号:HAK-2014HPM-05);中国物理研究院科学发展基金(批准号:2014B0402068)资助的课题~~

摘　　要：带状注相对论扩展互作用速调管放大器是一种高功率、高频率的微波毫米波放大型器件,具有广阔的应用前景.本文分析了扩展互作用结构多间隙谐振腔的渡越时间效应,推导了2π模场情况下谐振腔的能量交换系数和电子负载电导,且通过计算表明工作在2π模式三间隙腔的电子负载电导是单间隙腔的9倍左右,多间隙结构有利于提高器件效率.利用三维粒子仿真软件,对工作在Ka波段的带状注相对论扩展互作用速调管放大器进行了模拟研究,采用宽高比为30:1的带状电子束以降低空间电荷效应,在电子束电压为500 kV,束流为1 k A,轴向引导磁感应强度为0.8 T的情况下,器件输出微波功率为190 MW,频率为40 GHz,器件效率为38%,器件增益为69 d B.The sheet beam klystron is a kind of novel powerful microwave and millimeter-wave vacuum electron device, m which used is a thin rectangular sheet beam with high aspect ratio in order to improve beam-wave interaction efficiency by improving space-charge-limiting current of electron beam and obtaining big electric current, and it has many actual and potential applications. Based on the motion of the single electron under the small signal condition, the transit- time effect of electron beam in 2Tt-mode standing wave electric field in a multiple-cavity resonator is investigated, the expression of electron load conductance in a multiple-cavity resonator is presented, and the influence of the cavity number N on transit-time effect in a multiple-cavity resonator is discussed. The high frequency characteristics of the three-gap extended cavity are studied. The abilities for the single-gap cavity and three-gap cavity to modulate the sheet beam are compared by 3D FIC simulation. The simulation result shows that the three-gap extended interaction cavity operating at 2Tt mode is better than the single-gap cavity. The electron load conductance is derived and corrected based on the theory of relativity~ by which a more accurate relation of electron load conductance to transmit angle can be obtained. In order to improve the output power and electron efficiency, the three-gap extended output cavity is used in the relativistic klystron to replace the single gap output cavity. By using the electromagnetic simulation software and 3D PIC code, a Ka-band sheet beam relativistic extended interaction klystron amplifie is designed. A sheet electron beam with a width-to-height ratio of 30 is adopted to reduce the space charge effect. In the PIC simulation~ when the beam voltage is 500 kV and current is 1 kA, the device can generate a 190 MW output power at 40 GHz with an efficiency of 38% and a gain of 69 dB. The 3 dB bandwidth of the EISBK is about 150 MHz. Meanwhile, the output microwave is without the clutter jamming, which makes the

关 键 词：KA波段 带状电子束 扩展互作用速调管 束波互作用 

分 类 号：TN722[电子电信—电路与系统]