0.9Pb(Sc_(0.5)Ta_(0.5))O_3-0.1PbTiO_3/PbTiO_3多层薄膜制备及铁电性研究  

Preparation and Ferroelectric Properties of 0.9Pb(Sc_(0.5)Ta_(0.5))O_3-0.1PbTiO_3/PbTiO_3 Multilayer Thin Films

作　　者：李雪冬[1,2] 刘洪[2] 吴家刚[2] 刘刚[1] 肖定全[2] 朱建国[2] 

机构地区：[1]绵阳师范学院物理与电子工程学院,四川绵阳621000 [2]四川大学材料科学与工程学院,四川成都610064

出　　处：《绵阳师范学院学报》2015年第5期26-29,共4页Journal of Mianyang Teachers＇ College

基　　金：绵阳师范学院科研课题项目(QD2013A07)

摘　　要：以LaNiO3做缓冲层,用射频磁控溅射法在SiO2/Si(100)衬底上制备出0.9Pb(Sc0.5Ta0.5)O3-0.1PbTiO3/PbTiO3铁电多层薄膜.采用两步法在峰值温度750℃对薄膜进行退火.通过电滞回线和漏电流曲线对薄膜的铁电性能进行了测量.研究发现,原位生长的薄膜已经具备了较好的铁电性,这为(1-x)Pb(Sc0.5Ta0.5)O3-x0.1PbTiO3薄膜的低温制备提供了可能性.经过退火后,薄膜的铁电性略有下降,高温下铅的损失可以很好的解释这一现象.The 0. 9Pb（Sc0. 5 Ta0. 5 ）O3 - 0. 1PbTiO3 / PbTiO3 multilayer thin films（（PSTT10 / PT）3 ）were de-posited on SiO2 / Si（100）substrates by radio frequency magnetron sputtering technique with LaNiO3 buffer and e-lectrode layer,and the films were subsequently annealed by a two - step rapid thermal annealing approach at peak temperature of 750 ℃. The P - E loops and leakage current characteristics of the films were measured. The result shows that the in - situ deposited multilayer thin films possess well ferroelectric properties and it provided possibil-ity to prepare PSTT under the low temperature. The after - annealed films exhibit a slight degradation on ferroelec-tric properties. It is attributed to the loss of Pb inside the films.

关 键 词：多层薄膜 铁电性 电滞回线 退火 

分 类 号：O484[理学—固体物理]