飞机蜂窝夹层结构的激光错位散斑原位检测  

In-Situ Inspection of Aircraft Honeycomb Structure by Laser Shearography

作　　者：袁英民[1] 陈新波[1] 

机构地区：[1]海军航空工程学院青岛校区,青岛266041

出　　处：《无损检测》2015年第5期7-9,共3页Nondestructive Testing

摘　　要：针对目前外场飞机蜂窝夹层结构脱粘检测可靠性差、定量不准确等问题,采用激光错位散斑检测技术,对蜂窝夹层结构脱粘缺陷进行试验,分析了加载时间对检测结果的影响,实现了精确定量,并应用该技术对飞机机翼等蜂窝夹层结构进行了外场原位检测,证明该方法检测效率高,检测结果准确,适合于外场蜂窝结构脱粘缺陷的原位检测。In view of the inspecting of debond defects of the airplane honeycomb structures, most conventional testing methods were subject to low testing reliability and difficulties in quantifying the defect in the outfield. Laser shearography technology was therefore applied to solve the problem. The influence of loading time on test results was analyzed, and the accurate quantitative results were obtained. It proves that the testing method is proper, the detection efficiency is high, and the testing results are accurate. The technology of laser shearography is therefore suitable for in situ testing of airplane honeycomb structures.

关 键 词：激光错位散斑 蜂窝结构 原位 

分 类 号：TG115.28[金属学及工艺—物理冶金]