基于Petrel软件的建模研究—以秦家屯油田SN78块为例  

The Model Based on Petrel Software-Taking SN78 block of Qinjiatun Oilfield as An Example

作　　者：杨祥禄 李朋[1] 

机构地区：[1]中国石化东北油气分公司四平采油厂,吉林长春130062

出　　处：《广东化工》2015年第10期54-55,共2页Guangdong Chemical Industry

摘　　要：秦家屯油田位于松辽盆地南部,梨树断陷东部斜坡区。SN78块位于秦中背斜,目前采出程度6.83%,尚有很大的剩余油潜力。通过数值模拟研究SN78区块剩余油的分布规律,包括纵向上层间、层内的水淹状况,确定主力油层,平面上的剩余油富集区。结合剩余油饱和度分布、剩余储量丰度等指标反映剩余油分布状况,为生产上动态分析和调整措施提供科学的依据。Qinjiatun oilfield is located in the south of Songliao Basin, the east slope area of Lishu fault depression. The SN78 block is located in the central anticline, degree of recovery of 6.83 %, have a great potential of remaining oil. Through the numerical simulation study of residual oil, including longitudinal inter layer, layer within the flooding conditions, to determine the main reservoir, remaining oil enrichment zone on the plane. Combined with the distribution of remaining oil saturation, surplus reserves abundance index reflect the remaining oil distribution, and provide scientific basis for the production of dynamic analysis and adjustment measures.

关 键 词：秦家屯油田 PETREL 建模 储层 

分 类 号：TE[石油与天然气工程]