检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
出 处:《强激光与粒子束》2015年第5期177-181,共5页High Power Laser and Particle Beams
基 金:国家自然科学基金项目(11275045);国家国际科技合作专项项目(2011DFA63190)
摘 要:根据Stevenson等效电路法设计了两个X波段低副瓣波导缝隙阵列天线。通过建立多个缝隙时的谐振长度提取模型,计算了存在缝隙间互耦时的谐振长度。两个阵列天线测试结果和仿真结果吻合良好,线阵中心频率实测增益为17.83dB,其仿真结果为18.2dB,实测副瓣为-28.12dB,其仿真结果为-29.97dB;平面阵列中心频率实测增益为27dB,其仿真结果为27.9dB,实测H面副瓣为-27.2dB,其仿真结果为-29.9dB,实测E面副瓣为-22dB,其仿真结果为-22dB。Two X-band low sidelobe slotted waveguide antenna arrays are designed and tested. The excitation amplitude of aperture unit is based on the Taylor distribution. Using the Stevenson equivalent circuit method, aperture offset is calculated with different excitation amplitude distributions. With a resonant length extraction model of multiple cracks, the aperture resonance length is calculated in mutual coupling environment. It is found that the slotted waveguide antenna array can be easily designed using the Stevenson formula and the resonance length obtained from mutual coupling environment. The measured gain of the line- ar antenna array is 17.83 dB and the simulation result is 18.2 dB. The measured sidelobe is -28.12 dB and the simulation result is -29.97 dB. The measured gain of the planar antenna array is 27 dB and the simulation result is 27.9 dB. The measured sidelobe of H-plane is 27.2 dB and the simulation result is --29.9. The measured sidelobe of E-plane is -22 dB and the simulation result is -22 dB. The test results of the antennas are highly consistent with the simulation results.
分 类 号:TN823[电子电信—信息与通信工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.43