检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王贺[1,2] 于世波[1,2] 曹辉[1,2] 原野[1,2] 秦秀山[1,2]
机构地区:[1]北京矿冶研究总院,北京100160 [2]金属矿山智能开采技术北京市重点实验室,北京102628
出 处:《有色金属工程》2015年第B05期71-76,共6页Nonferrous Metals Engineering
基 金:"十二五"国家科技支撑计划项目(2012BAB01B01;2012BAB01B04)
摘 要:针对甲玛铜矿大规模开采上覆贫矿体岩移规律及其控制技术开展研究。通过数值分析,研究得到采场开采及充填后上覆岩层位移及应力分布;通过开展相似模型实验研究,得到大规模盘区开采及充填后上覆岩体位移及变形规律。研究结果表明,数值模拟与相似模型试验结果具有较好的一致性;大直径束孔高分段空场嗣后充填法开采上覆贫矿体的岩移及应力变化受到近域的采场盘区开采的影响较为显著;地下采矿活动引起的地表变形影响较小。The research was carried out based on the strata movement rule of overlying poor ore with massive mining and the control technique. Through the numerical analysis, the displacement and stress distribution of overlying ore after mining and filling have been gained; through carrying out the similarity model test, the displacement and deformation rules overlying ore after mining and filling in large scale panel have been gained. The resuhs show that, the numerical simulation has a good consistency with the model test in results. The rock movement and stress changes of overlying poor ore mined by large-diameter bundle hole high sublevel cut and fill mining method are significantly affected by the mining of the adjacent mining panel. The surface deformation caused by underground mining activities is negligible.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.171