Co-adsorption of gaseous benzene, toluene, ethylbenzene,m-xylene(BTEX) and SO_2 on recyclable Fe_3O_4 nanoparticles at 0–101% relative humidities  

作　　者：Connie Z.Ye Parisa A.Ariya 

机构地区：[1]Department of Chemistry, McGill University [2]Department of Atmospheric and Oceanic Sciences, McGill University

出　　处：《Journal of Environmental Sciences》2015年第5期164-174,共11页环境科学学报（英文版）

基　　金：the support of the following Canadian funding agencies: NSERC, FRQNT and CFI

摘　　要：We herein used Fe3O4 nanoparticles（NPs） as an adsorption interface for the concurrent removal of gaseous benzene, toluene, ethylbenzene and m-xylene（BTEX） and sulfur dioxide（SO2）, at different relative humidities（RH）. X-ray diffraction, Brunauer-Emmett-Teller, and transmission electron microscopy were deployed for nanoparticle surface characterization.Mono-dispersed Fe3O4（Fe2O3·Fe O） NPs synthesized with oleic acid（OA） as surfactant, and uncoated poly-dispersed Fe3O4 NPs demonstrated comparable removal efficiencies.Adsorption experiments of BTEX on NPs were measured using gas chromatography equipped with flame ionization detection, which indicated high removal efficiencies（up to（95 ± 2）%） under dry conditions. The humidity effect and competitive adsorption were investigated using toluene as a model compound. It was observed that the removal efficiencies decreased as a function of the increase in RH, yet, under our experimental conditions, we observed（40 ± 4）% toluene removal at supersaturation for Fe3O4 NPs, and toluene removal of（83 ± 4）% to（59 ± 6）%, for OA-Fe3O4 NPs. In the presence of SO2, the toluene uptake was reduced under dry conditions to（89 ± 2）% and（75 ± 1）% for the uncoated and coated NPs, respectively, depicting competitive adsorption. At RH 〉 100%,competitive adsorption reduced the removal efficiency to（27 ± 1）% for uncoated NPs whereas OA-Fe3O4 NPs exhibited moderate efficiency loss of（55 ± 2）% at supersaturation.Results point to heterogeneous water coverage on the NP surface. The magnetic property of magnetite facilitated the recovery of both types of NPs, without the loss in efficiency when recycled and reused.We herein used Fe3O4 nanoparticles（NPs） as an adsorption interface for the concurrent removal of gaseous benzene, toluene, ethylbenzene and m-xylene（BTEX） and sulfur dioxide（SO2）, at different relative humidities（RH）. X-ray diffraction, Brunauer-Emmett-Teller, and transmission electron microscopy were deployed for nanoparticle surface characterization.Mono-dispersed Fe3O4（Fe2O3·Fe O） NPs synthesized with oleic acid（OA） as surfactant, and uncoated poly-dispersed Fe3O4 NPs demonstrated comparable removal efficiencies.Adsorption experiments of BTEX on NPs were measured using gas chromatography equipped with flame ionization detection, which indicated high removal efficiencies（up to（95 ± 2）%） under dry conditions. The humidity effect and competitive adsorption were investigated using toluene as a model compound. It was observed that the removal efficiencies decreased as a function of the increase in RH, yet, under our experimental conditions, we observed（40 ± 4）% toluene removal at supersaturation for Fe3O4 NPs, and toluene removal of（83 ± 4）% to（59 ± 6）%, for OA-Fe3O4 NPs. In the presence of SO2, the toluene uptake was reduced under dry conditions to（89 ± 2）% and（75 ± 1）% for the uncoated and coated NPs, respectively, depicting competitive adsorption. At RH 〉 100%,competitive adsorption reduced the removal efficiency to（27 ± 1）% for uncoated NPs whereas OA-Fe3O4 NPs exhibited moderate efficiency loss of（55 ± 2）% at supersaturation.Results point to heterogeneous water coverage on the NP surface. The magnetic property of magnetite facilitated the recovery of both types of NPs, without the loss in efficiency when recycled and reused.

关 键 词：Fe3O4 nanoparticles Co-adsorption Competitive adsorption BTEX removal SO2 removal 

分 类 号：X51[环境科学与工程—环境工程]