用混料设计法优化从钛白废酸中提取钪的萃取剂配比  

Optimization on Composition of Extractant Using for Extracting Scandium From Titanium White Waste Acid by Mixture Design

作　　者：胡莉蓉[1] 乐晓兵 陈杰山[1] 陈东旭[1] 

机构地区：[1]湖南化工职业技术学院,湖南株洲412004 [2]中盐湖南株洲化工集团技术中心,湖南株洲412004

出　　处：《湿法冶金》2015年第3期238-241,248,共5页Hydrometallurgy of China

基　　金：湖南省科技计划基金资助项目(2013GK3051)

摘　　要：应用混料设计中的D‐最优设计，用不同组成（P2045％～33％，TBP 2％～30％，磺化煤油65％～93％）的萃取剂从钛白废酸中萃取钪，以纯化倍数为响应值，研究了复合萃取剂的组成对纯化倍数的影响。采用Design Expert统计软件分析数据，建立回归方程及目标优化，得到 P204、TBP和磺化煤油的优化配比为14．80％ P204＋10．40％ TBP＋74．80％磺化煤油。在最优配比条件下，纯化倍数可达88．057。按优化配方制备复合萃取剂并进行验证试验，结果纯化倍数为87．965，钪回收率为99．99％，与模型预测值接近。利用混料设计法对复合萃取剂进行优化配比可行、高效。By D‐optimal design method ,composite of extractant for extracting scandium from titanium white waste acid was optimized .The effect of different proportions of P204（5% -33% ） ,TBP（2% -30% ） and sulfonated kerosene（65% -93% ） on extraction of scandium was investigated ,which was evaluated by purification factor .Statistical analysis of experimental data using Design‐expert software was carried out to build a regression model for purification factor .The optimal proportion of 14 .80%P204＋ 10 .40% TBP ＋ 74 .80% sulfonated kerosene is found .The actual scores of the optimal formulation is 87 .965 ,and recovery rate is 99 .99% ,which meets good with the predictive value .The results show that the mixture design is feasibility and efficiency .

关 键 词：混料设计法 钛白 废酸 钪 萃取 

分 类 号：TF845.1[冶金工程—有色金属冶金] TF804.2