连铸过程中钢液增氮影响因素的试验研究  

Experimental Study on the Effect Factors of Liquid Steel Nitrogen Absorptionduring the Continuous Casting Process

作　　者：李晶[1] 张立[1] 傅杰[1] 宋宇宾[2] 汪钺强[2] 于艳[2] 

机构地区：[1]北京科技大学冶金学院,北京100083 [2]宝山钢铁公司技术中心,上海201900

出　　处：《北京科技大学学报》2002年第4期400-402,413,共4页Journal of University of Science and Technology Beijing

摘　　要：研究了中包覆盖剂及连铸结晶器保护渣对82B及35K钢液吸氮的影响,结果表明:只要连铸钢液与大气接触就会增氮;熔点高于连铸钢液温度的中包覆盖剂不利于防止钢液吸氮;在同样的条件下,35K钢液吸氮量比82B大.Effect of tundish flux and mould slag on nitrogen absorption of 82B and 35K liquid steel during the continuous casting process has been studied. The results show that nitrogen in liquid steel will be increased when it is exposed at atmosphere, it is not good to prevent absorbing nitrogen when the melt-point of tundish flux is higher than the temperature of liquid steel, and the nitrogen absorption in 35K liquid steel is higher than that in 82B under the same condition.

关 键 词：连铸过程 钢液增氮 影响因素 试验研究 覆盖剂 保护渣 吸氮 渣溶点 渣温 

分 类 号：TF777[冶金工程—钢铁冶金]