G34L商用微波炉微波泄漏改善研究  

A Study on Microwave Leakage Improvement in G34L Commercial Microwave Oven

作　　者：张卫强[1] 吴喆[1] 曾葆青[1] 唐相伟 王翔[1] 陈又鲜 

机构地区：[1]电子科技大学物理电子学院,四川成都610054 [2]广东美的厨房电器制造有限公司,广东佛山528311

出　　处：《真空电子技术》2015年第2期73-76,共4页Vacuum Electronics

摘　　要：G34L商用微波炉负载微波泄漏最大为3.43mW/cm2,不满足UL标准(<1mW/cm2),需要改善。本文结合微波炉门齿扼流理论,利用电磁场仿真软件HFSS,对炉门处微波泄漏进行原因分析并优化设计得出了门齿尺寸:增加4.6mm折弯。通过手板测试验证,负载微波泄漏最大为0.20mW/cm2,微波泄漏量降低为改善前的13.7%。The microwave leakage power density with load of G34L is 3.43 mW/cm^2 . The value is out of the UL standard （〈1 mW/cm^2）. This paper is based on the choke theory of microwave oven incisor. The reason of microwave leakage near the door was analyzed by HFSS. Also optimization design by electromagnetic simulation get the incisor size. adding 4. 6 mm bend. Finally it was verified by door prototype testing. The leakage maximum is 0. 20 mW/cm^2 after modified, which is reduced to 13.7% compared to the original value.

关 键 词：微波泄漏 门齿 HFSS 优化 验证 

分 类 号：TM925.54[电气工程—电力电子与电力传动]