动定刀同轴水稻秸秆切碎还田装置结构设计与试验  

Design and experiment of chopping device with dynamic fixed knife coaxial for rice straw

作　　者：邱进[1,2,3] 吴明亮[1,2,3] 官春云[4] 方友祥 李小聪[1,2,3] 

机构地区：[1]湖南农业大学工学院,长沙410128 [2]湖南省现代农业装备工程技术研究中心,长沙410128 [3]南方粮油作物协同创新中心,长沙410128 [4]湖南农业大学油料所,长沙410128 [5]益阳资江联合收割机开发有限公司,益阳413000

出　　处：《农业工程学报》2015年第10期11-19,共9页Transactions of the Chinese Society of Agricultural Engineering

基　　金：湖南省科技厅重点项目(2013FJ2006);湖南省教育厅重点项目(13A038)

摘　　要：针对中国南方稻田留茬高、土壤黏重,油菜栽种复式作业机耕整地作业部件易缠草、壅泥,影响作业质量和油菜出苗的难题,提出了将田间稻秸秆收集切碎并绕过耕作部件后均匀覆盖于播种行行间的种植方法,研发了多功能油菜覆草直播播种机,围绕该机器设计了一种动刀与定刀及风送叶片同轴安装的稻秸秆切碎装置,并分别对稻秸秆的"站秆"和"残茬"进行切碎台架试验。结果表明:喂入压辊转速、动刀转轴转速、动定刀间隙3个影响因素对切碎长度合格率、功耗影响显著;对"站秆"和"残茬"切碎的各因素取值为:喂入压辊转速399.2、401.64 r/min,动刀转轴转速968.12、977.23 r/min,动定刀间隙0.52、0.49 mm时,稻秸秆切碎合格长度率为95.78%、96.98%,功率损耗为3.09、2.68 k W。经整机田间试验,该装置的秸秆田间覆盖效果达到油菜种植农艺要求。该研究为多功能油菜覆草直播播种机产业化提供了技术参考。Due to long stubble remained in farmland after harvesting as well as hardened and impervious soil in southern farmland of China, the tillage and land preparation parts of multifunctional rape-planting machine tend to wind grass and obstruct with mud, which impairs the working performance of ridging equipment and reduces the percentage of rapeseed seedling germination. In order to solve these problems, a rapeseed planting method is proposed, which combines the straw mulching cultivation with the direct seeding. The method is used to collect and cut the rice stubbles, and then the chopped rice stubbles are evenly covered on the inter-row spaces without involving the tillage apparatus. A multifunctional rape-planting device is mounted to a rice combine-harvester by replacing screening device, using the original harvester header to collect the rice stubbles and replacing the threshing cylinder to chop and scatter the rice stubbles. In this paper, an air-assisted chopping mechanism was designed, in which the moving knives and the transplanting blades were coaxially installed. The performance of the air-assisted chopping mechanism was evaluated by simulating the chopping operation of “stalk-standing” and “crop residue” in farmland through a bench test driven by an electric motor. A quadratic orthogonal rotating experiment was designed by Design-Expert software. Based on the variance analysis and regression fitting, a multiple regression equation was obtained, showing the effects of the rotating speed of feeding press rolls, the rotating speed of rotation shaft of moving knives and the gaps between moving knife and stationary knife on the qualified rate of chopped stalk length and the power attenuation. It was shown that the rotating speed of rotation shaft of moving knives had the most influential effect, followed by the gaps between moving knife and stationary knife, and the rotating speed of feeding press rolls had the least effect on the qualified rate of chopped stalk length and the power attenuation. The r

关 键 词：农业机械 机械化 设计 稻秸秆 切碎 秸秆还田 

分 类 号：S223.24[农业科学—农业机械化工程]