检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:屈苗 喻晓[1] 张洁[1] 沈杰[1] 钟昊玟 张艳燕[1] 颜莎[2] 张小富[1] 张高龙[1] 乐小云[1]
机构地区:[1]北京航空航天大学物理科学与核能工程学院,北京100191 [2]北京大学重离子物理研究所,北京100871
出 处:《强激光与粒子束》2015年第7期216-220,共5页High Power Laser and Particle Beams
基 金:国家自然科学基金项目(11175012);国家磁约束核聚变研究计划专项资助项目(2013GB109004)
摘 要:强流脉冲离子束在靶上的能量密度分布是其研究和应用的一个重要参数.为了解决现有束流能量密度诊断方法的不足,利用红外成像仪测量靶背面的温度分布,从而建立了强流脉冲离子束能量密度分布的红外诊断方法.对能量密度1J/cm2量级、脉冲宽度为102ns量级的束流,该方法测量误差好于5%,空间分辨率可达到1~2mm,具有操作简便、成本低的优点,是强脉冲能量沉积分布的一种高效迅速的诊断方法.One of the most important parameters of the intense pulsed ion beam(IPIB) is the distribution of the energy den sity at the cross section. Aiming to solve the problem of traditional diagnostic methods for beam energy density, we measured the temperature distribution of the reverse side of target by infrared camera to develop the infrared diagnostic techniques of IPIB ener gy density distribution. For IPIB of energy density about ] J/cm2 and pulse width about 100 ns, the error using this method is less than 5% and the spatial resolution achieves 1-2 mm. The method has the advantages of easy operation and low cost, it is an effi cient prompt monitoring method for the IPIB energy density distribution.
关 键 词:强流脉冲离子束 红外诊断 红外校准曲线 能量密度分布 横向扩散
分 类 号:O571.1[理学—粒子物理与原子核物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7