检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]山东理工大学智能电网研究中心,山东淄博255087 [2]国网福建省电力有限公司,福建福州350003
出 处:《供用电》2015年第6期12-16,29,共6页Distribution & Utilization
基 金:国家自然科学基金项目(51177096)~~
摘 要:对配电网采用什么接地方式,目前业界还没有完全形成共识。讨论了中性点接地方式与分类问题、接地方式对供电质量与人身安全的影响、小电流接地故障选线与定位以及利用瞬时性接地故障信息实现在线监测等问题,指出小电流接地方式能够减少50%以上的故障停电次数,小电阻接地方式在人身安全方面并没有优势,长期以来制约小电流接地故障选线技术的难题已经得到解决,因此,配电网优先考虑采用小电流接地方式,特别要杜绝将已经采用小电流接地的架空网络或架空线路与电缆混合网络改为小电阻接地方式。A consensus has not been reached on the adaption of the natural neutral grounding modes of distribution networks. The classification of grounding modes, the impacts of grounding modes on power quality and human safety, the faulty feeder identification and fault location techniques, and the online monitoring using transient fault information are discussed. It is pointed out that the small current grounding can reduce more than 50% fault interruptions~ the low resistance grounding does not have significant advantages on human safety due to significant breakthroughs of the faulty feeder identification and fault location techniques in recent years. The small current grounding shall be considered as the preferable option for distribution networks. The switching over for small current grounding to low resistance grounding for networks containing overhead lines must always be avoided.
关 键 词:配电网 中性点接地方式 小电流接地 小电流接地故障 高阻故障 在线监测
分 类 号:TM727.2[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.63