CO_2 capture using dry TiO_2-doped Na_2CO_3/Al_2O_3 sorbents in a fluidized-bed reactor  

TiO_2掺杂Na_2CO_3/Al_2O_3吸收剂在流化床中的CO_2捕集特性（英文）

作　　者：董伟[1] 陈晓平[1] 余帆[1] 

机构地区：[1]东南大学能源热转换及其过程测控教育部重点实验室,南京210096

出　　处：《Journal of Southeast University(English Edition)》2015年第2期220-225,共6页东南大学学报（英文版）

基　　金：The National Natural Science Foundation of China(No.51476030);the Specialized Research Fund for the Doctoral Program of Higher Education(No.20130092110006)

摘　　要：Abstract： In order to improve the reactivity of Na2CO3/Al2O3 sorbent with CO2, a new sorbent showing high reactivity was developed by doping Na2CO3/Al2O3 with TiO2 using impregnation. Fourteen multi-cycle carbonation/regeneration tests of the sorbent were carried out in a fluidized-bed reactor and the sorbent was characterized by X-ray diffraction and nitrogen adsorption. It is confirmed that TiO2 shows a positive effect on the adsorption process of Na2CO3 and the reaction rate is observed to increase significantly, especially in the first 10 min. Moreover, TiO2 is stable within the temperature range of the process and no other Ti-compounds are detected. The carbonation products are NaHCO3 and Na5H3 （CO3 ）4. The surface area and the pore volume of the sorbent keep stable after 14 cycles. The Fourier transform infrared spectroscopy and the X-ray photoelectron spectroscopy are used to analyze the effect mechanism of TiO2 on CO2 adsorption process of Na2CO3/Al2O3.由于Na2CO3/Al2O3吸收剂的活性成分Na2CO3与CO2反应活性较低,选用TiO 2作为掺杂剂,采用浸渍法将其添加到Na2CO3/Al2O3吸收剂中进行改性,研制一种新型具有高反应活性的钠基固体吸收剂.利用小型流化床反应器进行了14次循环脱碳/再生试验,并对吸收剂进行了XRD和氮吸附表征.结果表明:掺杂TiO 2后,吸收剂与CO2的反应速率加快,特别是在碳酸化反应的前10 min内;反应前后除TiO 2外无其他含Ti化合物生成;碳酸化反应产物为Na HCO3和Na5H3(CO3)4;14次循环反应后吸收剂仍保持稳定的微观结构.采用XPS和FTIR分析了TiO 2对Na2CO3/Al2O3吸收剂脱碳特性的改性机理.

关 键 词：CO2 capture Na2CO3／Al2O3 TiO2 fluidized-bed test 

分 类 号：TK09[动力工程及工程热物理]