苗盘钵苗自动识别及控制装置的设计与试验  

Design and experiment on transplanter pot seedling disk conveying and positioning control system

作　　者：吴俭敏[1] 张小超[1] 金鑫[2] 刘忠军[1] 朱立成[1] 孙星[1] 邹卓然[1] 刘邦司 

机构地区：[1]中国农业机械化科学研究院,北京100083 [2]河南科技大学农业工程学院,洛阳471003

出　　处：《农业工程学报》2015年第1期47-52,共6页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家重点基础研究发展计划(973计划)资助项目(2012CB723704)

摘　　要：针对全自动移栽机在田间作业中,因苗盘的钵苗格缺苗而导致的漏栽问题,研制了一种苗盘钵苗自动识别及控制试验装置。该试验装置采用单苗爪取苗,步进电机驱动钵苗盘纵向和横向移动,光电传感器作为钵苗识别装置,由可编程逻辑控制器(programmable logic controller,PLC)为控制核心,触摸屏作为人机界面,可适应不同规格的苗盘参数,可选择对该装置进行手动或自动控制。试验结果表明,该装置可有效地对钵苗格是否缺苗进行自动识别,并控制苗盘输送装置,使缺苗的钵苗格快速跳过取苗爪,提高取苗爪的抓取效率,以降低漏栽率;相对于没有采用钵苗自动识别的移栽模式,该系统漏栽率整体降低了约12%。该研究可为全自动移栽机的进一步自动化智能化设计提供参考。In order to solve the problem of seedlings leakage planting caused by the lack of plug seedlings in trays during with the all automatic transplanter working, an automatic recognition and control device for vegetable plug seedling transplanter was designed. In contrast to the home and abroad information, the design considered the domestic user price affordability and practicality. In this device, a stepping motor was used for driving the seedling disc horizontal motion and another was used for driving the seedling disc vertical motion. Four photo-electric sensors as the seedling recognition device were fitted on both sides of the seedling gripper and seedling disc, which can detect of seedling shortage from four directions. A programmable logic controller （PLC） was used to control clamping seedling gripper motion and the seedling disc transport along horizontal and vertical direction. A touch screen as man-machine interface can set the parameter to fit different size seedling disc, which can also choose manually or automatic control method. In this paper, a comparative experiment f was carried out at different transplanting velocity under the condition of automatic recognition system or one month old pepper seedling. The results showed that it could work effectively. The movement of the seedling trigger photoelectric sensor produced a signal, so that the seedlings were stopped and clamped away when moving to the position of the seedling gripper. On the contrary, the lack of seedling lattice cannot trigger photoelectric sensor, on arrival will not stop the seedling fetching device position, but quickly through, directly send the next seedling to stop on position of the seedling gripper, waiting for the clamping seedling gripper. This improves the seedling grab efficiency, reducing the leakage rate of transplanting machine plant. Automatic recognition and control device had low misjudge rate when transplanting speed was form 60 to 120 seedling per minutes. When transplanting speed was from 60 to 90 seedling per

关 键 词：农业机械 传感器 移栽 钵苗识别 

分 类 号：S223.94[农业科学—农业机械化工程]