NJS-1型植保直流闭口式风洞设计与试验  

Design and experiment of NJS-1 type open-circuit closed wind tunnel for plant protection

作　　者：丁素明[1] 薛新宇[1] 兰玉彬[2] 蔡晨[1] 张玲[1] 秦维彩[1] 张宋超[1] 

机构地区：[1]农业部南京农业机械化研究所,南京210014 [2]美国农业部南方平原研究中心,德克萨斯77845

出　　处：《农业工程学报》2015年第4期76-84,共9页Transactions of the Chinese Society of Agricultural Engineering

基　　金：公益性行业(农业)科研专项资助项目(201203025);现代农业装备与技术协同创新中心项目;江苏省农机三新工程项目(NJ2014-09)

摘　　要：针对农药雾滴飘移特性研究的需要,依照流体力学、空气动力学及相似理论设计了NJS-1型植保低速风洞。该风洞型式为直流闭口式,主要由进气段、动力段、过渡段、扩散段、稳定段、收缩段及试验段等部分组成,采用理论计算确定各段结构,风洞总体尺寸为20 m×2.7 m×4.3 m（长×宽×高）;动力段流道型式为R＋S级,叶轮直径1.2 m,叶片数为8,后导叶叶片宽度0.18 m,叶片数为7;扩散段为大角度扩散,扩散角40°;稳定段采用六角形蜂窝器和两层阻尼网组合设计;试验段长度为7.5 m,出口截面尺寸为1.8 m×1.2 m（高×宽）。通过性能试验测定了风洞试验段气流品质,试验结果表明：试验段风速1.0-10 m/s连续可调,气流动压稳定系数小于1.5%,气流紊流度小于1%;同时在1.0-9.0 m/s风速下测定试验段入口截面风场均匀性,表明随着风速的增加,风场的风速分布更加均匀。该文为进一步研究植保风洞的结构设计和飘移试验参数优化提供依据。Drift potential is one of the most important factors affecting spraying quality. Plant protection wind tunnel is an important and preferred tool for quantitative study on drift potential, which is an effective, reliable and feasible research tool for the parameter localization of spray model building. Wind tunnel can provide a well controlled environment for drift measurements under a range of wind speeds and spraying conditions. The NJS-1 type of plant protection wind tunnel was designed based on the drift potential theory, principle of wind tunnel design and atmospheric boundary layer similarity theory, which was composed of inlet section, power section, flexible section, transition section, diffusion section, stability section, contraction section and working section. The total length of the wind tunnel was about 20.0 m; the length of the working section（including five subsections） was about 7.5 m, while the cross section the of the working section was 1.2 m wide and 1.8 m high; the contraction section was 3.0 m long and the contraction ratio was 4; the settling chamber was 2.5 m long and the cross section was 2.4 m wide and 3.6 m high; a hexagon honeycomb of stainless steel and two 18-mesh stainless steel screens were embedded inside the settling chamber; the diffusion section was 2.5 m long, and diffusion ratio was 4 and diffusion angle was 40°; the transition section was 2.8 m long and its main function coupled the power section and the diffusion section. The power section was composed of collector device, impeller, nose cowl, guide vane unit, trail hood and air duct, and was produced by an axial fan which was driven by the 25 kW electric machine. The design of the air supply device and main technical parameters of key parts was based on the theories of fluid mechanics. The air volume of the fan was 21.6 m3/s at the fan speed of 960 r/min, which was determined to adopt 8 impellers and 9 guide glades, the impeller diameter was 1.2 m and the guide glade width was 0.18 m. Wind profiles and flow dynamic ch

关 键 词：风洞 设计 喷雾 植保 雾滴飘移 流场 流场品质 

分 类 号：V211.7[航空宇航科学与技术—航空宇航推进理论与工程]