冲压泵叶轮后侧腔体结构对泵水力性能的影响  

Effects of Different Pump Cavity Structure on Stamping Pump Performance

作　　者：牟介刚[1] 汪洋[1] 郑水华[1] 王荣[1] 刘菲[1] 范文粲[1] 

机构地区：[1]浙江工业大学,浙江杭州310014

出　　处：《流体机械》2015年第6期4-8,共5页Fluid Machinery

基　　金：国家自然科学基金资助项目(51305399)

摘　　要：选取MDP64-20型立式多级冲压泵作为研究对象,在泵腔喉部宽度确定的基础上,选取平面隔板、曲面隔板、L型隔板和型线隔板4种腔体形式进行研究。通过数值模拟,经过流场分析、性能曲线分析,比较4种隔板对冲压泵水力性能的影响,确定最佳结构。研究结果表明,在小流量工况下,型线隔板的设计能较好地改善液体流动,减小水力损失;在较大流量工况下,冲压泵效率受到导叶入口处流动、泵腔内部流动两方面综合影响,平面隔板和型线隔板较为优异。Select the MDP64-20 type vertical multilevel stamping pump as the research object, with the same throat width, these four plans of plane-clapboard, curved surface-clapboard, L-clapboard and profile Line-clapboard were described in detail. After contrast the analysis and calculation to these different structures by CFD ,the influence of different chamber structures on perform- ance was investigated and a set of optimized chamber structure model was determined at last. The results show that, in the small flow rate condition, profile line-clapboard can improve the liquid flow, reduce the hydraulic loss;in the large flow rate condition, stamping pump efficiency by the flow, guide vane pump chamber internal flow effect two aspects, plane-clapboard and profile Line- clapboard is excellent.

关 键 词：冲压泵 泵腔结构 水力性能 数值模拟 试验研究 

分 类 号：TH3[机械工程—机械制造及自动化]