检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:高卫[1] 王珏[1] 谢大为[1] 徐昊[1] 吴六顺[1] 董元篪[1]
机构地区:[1]安徽工业大学冶金工程学院,安徽马鞍山243002
出 处:《山西冶金》2015年第3期24-27,共4页Shanxi Metallurgy
基 金:国家自然科学基金资助项目(51204005;51174001)
摘 要:用四元合成转炉钢渣部分替代铁水预处理渣进行脱磷实验,确定了反应最佳温度(1 350℃)和渣金质量比(1∶7)。实验表明,当低磷转炉钢渣替代量不高于40%时,铁水预处理渣可以达到85%以上的脱磷率。低磷转炉钢渣部分替代铁水预处理脱磷渣进行脱磷具有一定的可行性,也有利于冶金资源的节约和再利用。CaO-SiO2-MgO-Fe2O3 synthetic converter slag is partially substituted for hot metal pretreatment dephosphorization slag. The optimal temperature(1350 ℃)and slag-metal ratio(1∶7) of the reaction is determined.The results show that when substitute amount of the low phosphorus converter steel slag is not more than 40%,dephosphorization rate of the hot metal pretreatment slag could reach up to 85%. The partial replacement of hot metal pretreatment dephosphorization slag with low phosphorus converter steel slag has presented feasible, which are beneficial to conservation and recycling of metallurgical resources.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.30