动力舱不同出口特征下车辆散热模块性能分析  

Performance Analysis of Vehicle Heat Exchange Module with Varied Characteristics of Engine Cabin Air Exit

作　　者：顾程鹏 刘佳鑫 秦四成[2] 

机构地区：[1]徐工集团工程机械股份有限公司,江苏徐州221006 [2]吉林大学机械科学与工程学院,吉林长春130025

出　　处：《筑路机械与施工机械化》2015年第7期95-98,共4页Road Machinery & Construction Mechanization

基　　金：国家自然基金项目(50775096);国家科技支撑计划(2013BAF07B04);江苏省科技支撑计划(BE2012041)

摘　　要：为了了解车辆散热出口特征对散热器模块传热性能的影响,保证动力舱散热效果,在已有研究的基础上,提出三种出口方案,结合相关资料使用三维软件建立动力舱模型,使用CFD数值方法进行了完整工况下的仿真求解。对仿真结果进行整理和对比后的结果表明:出口数目与散热器性能并非线性相关,就本文研究的车型而言,前置出口方案的散热效果最佳,前置与侧出口联合方案效果最差;虽然增加出口数量可以提高散热性能,但出口数量过多时反而会降低散热器的工作性能,使系统过热。For better understanding air exit influence on heat exchange performance of radiator module and keeping vehicle heat dissipation capacity stable, three air exit schemes were offered based on former research, and physical 3D model was set up in software based on related materials. Modified models were simulated with CFD numerical method under a complete condition. Characteristics of performance changes of radiator module were compared and concluded, and it shows that there is no linear relationship between air exit account and radiator performance. As for the vehicle being discussed, adding air exit could improve radiator performance, and front air exit scheme is best of all while the one united with sided exit is worst, which proves that too many air exits would lower radiator performance and cause overheat of the system.

关 键 词：动力舱 散热器 虚拟风洞 数值分析 

分 类 号：U415.5[交通运输工程—道路与铁道工程]