不同萃取剂下碳酸二甲酯合成工艺的性能评价  

Performance Evaluation of the Process of Synthesizing Dimethyl Carbonate With Different Extraction Agents

作　　者：刘玲娜[1] 方涛[2] 李健[1] 焦玉荣[1] 

机构地区：[1]榆林学院化学与化工学院,陕西榆林719000 [2]西安交通大学化学工程与技术学院,陕西西安710049

出　　处：《当代化工》2015年第6期1339-1343,共5页Contemporary Chemical Industry

基　　金：国家自然科学基金项目;项目号:21376186;中石油科技创新基金项目;项目号:2014D-5006-0401;榆林学院高层次人才科研启动基金项目;项目号:14GK25

摘　　要：通过化工流程模拟软件Aspen Plus对酯交换法合成碳酸二甲酯(DMC)流程中各塔的主要操作参数进行优化分析,得到该工艺的最佳操作条件。在此基础上,比较选用不同萃取剂苯胺和乙二醇时该工艺流程的热力学效率和CO2排放量。结果表明,苯胺为萃取剂时,DMC工艺流程的热力学效率明显提高、能耗降低,CO2排放量也大幅度降低。By optimizing and analyzing parameters of the columns for synthesizing dimethyl carbonate （DMC） by using Aspen Plus software, the optimum operation parameters were obtained. On this basis, the thermodynamic efficiency and CO2 emission of the synthesis process were compared and analyzed when aniline and ethylene glycol were respectively used as extraction agent. The results show that, compared with ethylene glycol as the extraction agent, using aniline as the extraction agent can lead to higher thermodynamic efficiency of DMC process, meanwhile the energy consumption and CO2 emission reduce significantly.

关 键 词：碳酸二甲酯(DMC) 热力学效率 CO2 排放量 

分 类 号：TQ028[化学工程]