重型装备综放工作面旋转开采边界三角煤关键技术研究  

Research on key technology of revolving mining the triangle coal in boundaries of full-mechanized caving mining face with heavy equipment

作　　者：高维智[1] 张会军[1] 张学亮[1] 

机构地区：[1]天地科技股份有限公司开采设计事业部,北京市朝阳区100013

出　　处：《中国煤炭》2015年第7期42-45,共4页China Coal

基　　金：国家自然科学基金项目(51474128);中国煤炭科工集团科技创新基金重点资助项目(KCSJQNCX-2014-07)

摘　　要：由于重型装备的综放工作面支架吨位大,前后部刮板输送机与转载机等端头设备搭接关系极其复杂,设备旋转过程中调架、移动管理难度极大,效率较低。因此,从重型设备综放工作面的设备搭接、工艺优化、巷道布置等方面做了详细研究,提出了重型装备综放工作面旋转开采成套关键技术。The supports in full-mechanized caving mining face with heavy equipment have large tonnage, the lapping relations of end equipment such as scraper conveyer and reversed loader are extremely complex, the difficulty of support shifting and movement management in process of equipment revolving is great and the efficiency is low. Based on above problems, equipment lapping, process optimization and roadway layout were researched, and the complete key technology of revolving mining in full-mechanized caving mining face with heavy equipment was put forward.

关 键 词：煤炭开采 旋转开采 重型设备 综放工作面 工艺优化 巷道布置 

分 类 号：TD823[矿业工程—煤矿开采]