检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张丹[1] 任玲[2] 杨柯[2] 张扬[1] 薛楠[1] 郭艳[3]
机构地区:[1]中国医科大学口腔医学院正畸教研室辽宁省口腔医学研究所正畸研究室辽宁省口腔疾病转化医学研究中心,辽宁省沈阳市110002 [2]中国科学院金属研究所,辽宁省沈阳市110016 [3]中国医科大学口腔医学院中心实验室,辽宁省沈阳市110002
出 处:《中国组织工程研究》2015年第25期4027-4032,共6页Chinese Journal of Tissue Engineering Research
基 金:辽宁省科技厅科学技术计划项目(2010225025);沈阳市科技计划项目(F11-262-9-35)~~
摘 要:背景:316L-Cu抗菌不锈钢是通过在不锈钢中添加一定量的铜元素,并采取特殊的热处理使不锈钢基体中均匀弥散分布富铜析出相,从而赋予抗菌不锈钢优异的抗菌性能。目的:评价新型316L-Cu抗菌不锈钢种植体对牙龈卟啉单胞菌的抗菌性能,并检测316L-Cu抗菌不锈钢的Cu离子溶出行为,为其进一步临床应用提供生物医学证据。方法:以医用316L不锈钢为成分基础,添加3.5%-4.0%的Cu元素制成316L-Cu抗菌不锈钢。将其按0.1 cm2/L表面积对容量比置于模拟体液中,在37℃震荡水浴中浸泡1-10 d。采用石墨炉原子吸光光度计每天测定浸提液中的铜离子含量。通过覆膜法抗菌实验及扫描电镜形态学观察评价316L-Cu抗菌不锈钢的杀菌性能。结果与结论:316L-Cu抗菌不锈钢在模拟体液中浸泡1-10 d后的Cu离子溶出量远高于普通医用316 L不锈钢。随着作用时间的延长,316L-Cu抗菌不锈钢的杀菌率逐步提高,10 h时杀菌率已达100%。316L-Cu抗菌不锈钢作用3 h后牙龈卟啉单胞菌的菌体形态即出现明显的变化,6 h后菌体出现明显的裂解,9 h后材料表面绝大多数细菌即崩解为碎片。说明316L-Cu抗菌不锈钢能够有效地杀灭种植体周围炎的主要致病菌,同时能够缓慢释放Cu离子,改变种植体周围微环境,说明其为一种极具潜力的生物材料,具有良好的临床应用价值。BACKGROUND: 316L-Cu antibacterial stainless steel is made by adding a certain amount of copper into the stainless steel followed by a special heat treatment to uniformly disperse copper-rich precipitates in stainless steel substrate, thereby harvesting the antibacterial properties. OBJECTIVE: To evaluate the antibacterial activity of the Cu ions released from 316L type Cu-bearing antibacterial stainless steels against Porphyromonas gingivalis, thereby providing biomedical evidence for its clinical application. METHODS: The medical 316L stainless steel samples at a surface area to volume ratio of 0.1 cm2/L were soaked in simulated body fluids at 37 ℃ for 1-10 days. A graphite furnace atomic absorption spectrophotometer wasemployed to detect the amount of Cu release in the simulated body fluids each day and then the rate of Cu release per day could be determined. The antibacterial activities of the steel samples were evaluated by a standard film-covered method under a scanning electron microscope. RESULTS AND CONCLUSION: The daily Cu releasin0 amount from the 316L-Cu stainless steel within 10 days was significantly higher than that of 316L stainless steel, and all the values remained nearly constant. With time, the sterilizing rate of 316L-Cu stainless steel was gradually increased, and reached 100% until the 10th hour. Porphyromonas gingivalis showed some morphological changes at 3 hours after treated with 316L-Cu stainless steel, appeared with cleavage at 6 hours, and mostly disintegrated into pieces at 9 hours. The results indicated that the 316L-Cu antibacterial stainless steel showed excellent antibacterial property against Porphyromonas gingiva/is, slowly release Cu irons, and alter the surrounding microenvirenment, which is a highly promising biomaterial and has good clinical value.
关 键 词:生物材料 口腔生物材料 抗菌不锈钢 牙龈卟啉单胞菌 杀菌率 微螺钉种植体 种植体周围炎 种植体支抗 钛合金种植体 不锈钢种植体
分 类 号:R318[医药卫生—生物医学工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15