行星齿轮系统载荷分配行为机理及影响因素分析  

Analysis of behavior mechanism and influential factors of load sharing in an epicyclic gear system

作　　者：廖映华[1,2] 秦大同[1] 刘长钊 

机构地区：[1]重庆大学机械工程学院机械传动国家重点实验室,重庆400044 [2]四川理工学院机械工程学院,四川自贡643000

出　　处：《航空动力学报》2015年第1期201-208,共8页Journal of Aerospace Power

基　　金：国家重点基础研究发展计划(2014CB046304);国家科技支撑计划(2011BAF09B07-02)

摘　　要：将中心构件轴承弹性变形和太阳轮-行星轮-内齿圈支路的弹性变形分别集中在行星架轴承和行星轮轴承中心得到行星齿轮系统的等效模型,并采用行星架刚体运动来模拟行星齿轮系统的载荷分配行为,从而得到行星齿轮系统的载荷分配求解模型.在此基础上得到了载荷分配与轴承等效刚度、各种误差之间的定量关系,分析了各种影响因素对载荷分配的影响规律.结果表明:当行星架轴承与行星轮轴承的等效刚度相差2个数量级以上时,载荷分配只与行星轮轴承等效刚度和行星轮切向位置误差有关,减小行星轮切向位置误差和行星轮轴承等效刚度可实现均载;行星轮和太阳轮偏心误差使系统受到周期性激励,动态载荷系数增大,因此减小行星轮和太阳轮偏心误差可实现动态均载.The elastic deformations of bearings of the coaxial members and a sun-planetring path were respectively considered on the carrier＇s and planet＇s bearing center,and then an equivalent model of an epicyclic gear system was established.The load sharing behavior of an epicyclic gear system was simulated by the motions of the carrier rigid body,and a model to calculate load sharing in an epicyclic gear system was presented.And then the quantitative relations among load sharing,the equivalent stiffness of bearing and errors were obtained by the proposed approach,and the influences of all kinds of factors on load sharing were analyzed.The results show that when the difference between the equivalent stiffness of carrier bearing and the equivalent stiffness of planet bearing is more than two orders of magnitude,load sharing is only related to the equivalent stiffness of planet bearing and tangential position error of the planet,so the load can be evenly distributed by reducing tangential position error of planet and the equivalent stiffness of planet bearing.Cyclical excitations will be caused by the eccentricity errors of planet or sun,and the dynamic load coefficient can beincreased,so the dynamic loads will be evenly distributed by reducing the eccentricity errors of the planet and sun.

关 键 词：载荷分配行为 行星齿轮系统 等效模型 轴承刚度 制造、安装误差 

分 类 号：V215[航空宇航科学与技术—航空宇航推进理论与工程] TH132.4[机械工程—机械制造及自动化]