Three-dimensional Construction and Omni-directional Rolling Analysis of a Novel Frame-like Lattice Modular Robot  

作　　者：DING Wan WU Jianxu YAO Yan'an 

机构地区：[1]School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University

出　　处：《Chinese Journal of Mechanical Engineering》2015年第4期691-701,共11页中国机械工程学报（英文版）

基　　金：Supported by National Natural Science Foundation of China(Grant No.51175030);Fundamental Research Funds for the Central Universities,China(Grant No.2012JBZ002);Research Fund for the Doctoral Program of Higher Education(Grant No.20130009110030);Major Project of Ministry of Education of China(Grant No.625010403)

摘　　要：Lattice modular robots possess diversity actuation methods, such as electric telescopic rod, gear rack, magnet, robot arm, etc. The researches on lattice modular robots mainly focus on their hardware descriptions and reconfiguration algorithms. Meanwhile, their design architectures and actuation methods perform slow telescopic and moving speeds, relative low actuation force verse weight ratio, and without internal space to carry objects. To improve the mechanical performance and reveal the locomotion and reconfiguration binary essences of the lattice modular robots, a novel cube-shaped, frame-like, pneumatic-based reconfigurable robot module called pneumatic expandable cube（PE-Cube） is proposed. The three-dimensional（3D） expanding construction and omni-directional rolling analysis of the constructed robots are the main focuses. The PE-Cube with three degrees of freedom（Do Fs） is assembled by replacing the twelve edges of a cube with pneumatic cylinders. The proposed symmetric construction condition makes the constructed robots possess the same properties in each supporting state, and a binary control strategy cooperated with binary actuator（pneumatic cylinder） is directly adopted to control the PE-Cube. Taking an eight PE-Cube modules＇ construction as example, its dynamic rolling simulation, static rolling condition, and turning gait are illustrated and discussed. To testify telescopic synchronization, respond speed, locomotion feasibility, and repeatability and reliability of hardware system, an experimental pneumatic-based robotic system is built and the rolling and turning experiments of the eight PE-Cube modules＇ construction are carried out. As an extension, the locomotion feasibility of a thirty-two PE-Cube modules＇ construction is analyzed and proved, including dynamic rolling simulation, static rolling condition, and dynamic analysis in free tipping process. The proposed PE-Cube module, construction method, and locomotion analysis enrich the family of the lattice modular robot and prLattice modular robots possess diversity actuation methods, such as electric telescopic rod, gear rack, magnet, robot arm, etc. The researches on lattice modular robots mainly focus on their hardware descriptions and reconfiguration algorithms. Meanwhile, their design architectures and actuation methods perform slow telescopic and moving speeds, relative low actuation force verse weight ratio, and without internal space to carry objects. To improve the mechanical performance and reveal the locomotion and reconfiguration binary essences of the lattice modular robots, a novel cube-shaped, frame-like, pneumatic-based reconfigurable robot module called pneumatic expandable cube（PE-Cube） is proposed. The three-dimensional（3D） expanding construction and omni-directional rolling analysis of the constructed robots are the main focuses. The PE-Cube with three degrees of freedom（Do Fs） is assembled by replacing the twelve edges of a cube with pneumatic cylinders. The proposed symmetric construction condition makes the constructed robots possess the same properties in each supporting state, and a binary control strategy cooperated with binary actuator（pneumatic cylinder） is directly adopted to control the PE-Cube. Taking an eight PE-Cube modules＇ construction as example, its dynamic rolling simulation, static rolling condition, and turning gait are illustrated and discussed. To testify telescopic synchronization, respond speed, locomotion feasibility, and repeatability and reliability of hardware system, an experimental pneumatic-based robotic system is built and the rolling and turning experiments of the eight PE-Cube modules＇ construction are carried out. As an extension, the locomotion feasibility of a thirty-two PE-Cube modules＇ construction is analyzed and proved, including dynamic rolling simulation, static rolling condition, and dynamic analysis in free tipping process. The proposed PE-Cube module, construction method, and locomotion analysis enrich the family of the lattice modular robot and pr

关 键 词：modular robot pneumatic expandable cube pneumatic actuation omni-directional rolling binary control strategy 

分 类 号：TP242[自动化与计算机技术—检测技术与自动化装置]