热成形工艺中界面换热系数求解方法对比分析  被引量:2

Comparison of methods for calculating interfacial heat transfer coefficient in hot forming process

在线阅读下载全文

作  者:常颖[1] 唐行辉 王斌[1] 盈亮[1] 王存宇[2] 赵坤民[1] 

机构地区:[1]大连理工大学汽车工程学院,工业装备结构分析重点实验室,辽宁大连116024 [2]钢铁研究总院特殊钢研究所,北京100081

出  处:《中南大学学报(自然科学版)》2015年第4期1208-1214,共7页Journal of Central South University:Science and Technology

基  金:国家自然科学基金资助项目(10932003,51101036);辽宁省自然科学基金和教育部留学回国人员科研启动基金联合资助项目(优秀人才培育2014028001)~~

摘  要:根据高强度钢热成形特点,通过圆台模具实验,分别利用热平衡法、Beck非线性估算法以及基于优化的有限元仿真法(FEM优化法)求解热成形用22MnB5钢在模具淬火下的实时界面换热系数(IHTC),并对3种求解方法的结果和适用性进行比较和仿真验证。研究结果表明:Beck非线性估算法、热平衡法与FEM优化法3种方法求解IHTC的平均误差率分别为3.7%,7.5%和10.3%左右,Beck非线性估算法最准确;同时,得出马氏体相变的发生会对样件与模具间的IHTC有正的增益效果,压强与IHTC间存在着近似幂函数关系。The real-time interfacial heat transfer coefficient(IHTC) of 22 MnB5 steel in hot forming process was calculated by means of heat balance method, Beck's non-linear estimation method and optimization-based finite element simulation. The results show an average error of 3.7% for Beck's non-linear estimation method, 7.5% for heat balance method, and 10.3% for finite element simulation. The positive effect of martensitic transformation on interfacial heat transfer coefficient is obtained. Additionally, the relationship between the pressure and the heat transfer coefficient is approximated by a power function.

关 键 词:热成形 22MnB5钢 界面换热系数(IHTC) 热平衡法 Beck非线性估算法 FEM优化 

分 类 号:TG162.83[金属学及工艺—热处理]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象