纵-扭复合振动超声深滚加工试验研究  

Ultrasonic deep rolling technology with longitudinal-torsional vibration

作　　者：侯雅丽[1] 吴豪琼 刘传绍[1] 

机构地区：[1]河南理工大学机械与动力工程学院,河南焦作454003 [2]河南机电高等专科学校,河南新乡453003

出　　处：《兵器材料科学与工程》2015年第4期19-22,共4页Ordnance Material Science and Engineering

基　　金：国家自然科学基金项目(51005071);河南理工大学年青年骨干教师资助计划项目

摘　　要：采用正交-响应曲面法对6061-T651铝合金进行纵-扭复合振动超声深滚加工和普通深滚加工对比试验,研究各工艺参数对表面粗糙度的影响。正交试验结果表明:在相同的工艺参数下,纵-扭复合振动超声深滚加工后工件的表面粗糙度值小于普通深滚加工;表面粗糙度值随着静压力、转速的增大先减后增,随着进给量的增大先增后减再增;进给量对表面粗糙度的影响最显著,静压力对表面粗糙度的影响最小。基于试验结果采用二次回归构建表面粗糙度数学模型,并采用响应曲面法分析工艺参数之间的交互作用,确定了最优工艺参数。Orthogonal experiments of ultrasonic deep rolling with longitudinal-torsional vibration（UDR-LTV）and conventional deep rolling（CDR）of 6061-T651 aluminum alloy were carried out. The experimental results were analyzed by orthogonal-response surface methodology to study the effects of processing parameters on surface roughness. The orthogonal experiments results show that the values of surface roughness obtained by UDR-LTV are smaller than that by CDR with the same processing parameters. The values of surface roughness obtained by UDR-LTV first decrease and then increase with the increase of static pressure and spindle speed,while the values of surface roughess increase at first,then decrease and then increase with the increase of feed-rate. Meanwhile,feed-rate has a marked effect on surface roughness,and static pressure has a little effect on surface roughness. The quadratic regression method was used to construct the mathematic model of surface roughness based on the experimental results. The interactions between the processing parameters were analyzed using response surface method. The optimal parameters for the lowest surface roughness were given

关 键 词：纵-扭复合振动 超声深滚 工艺参数 表面粗糙度 

分 类 号：TB559[理学—物理] TG356.28[理学—声学]